Cold Saw/V1 Design Files/Drive Collar: Difference between revisions
< Cold Saw | V1 Design Files
Jump to navigation
Jump to search
(Created page with "*'''Outside Diameter: *'''Inside Diameter: 32mm''' *'''Length: *'''Setscrew Hole Diameter: 6.8mm Thru 1 Side, M8x1.25 tap *'''Setscrew Hole Spacing Along Length: *'''2D...") |
No edit summary |
||
| Line 10: | Line 10: | ||
*'''Setscrew Hole Spacing Along Length: | *'''Setscrew Hole Spacing Along Length: | ||
*'''Contact Hole Positioning: 4 equally spaced from each other.''' | |||
*'''Contact Hole Spacing From Center: | |||
*'''Contact Hole Diameter: 6.8mm Thru 1 Side, M8x1.25 tap''' | |||
Revision as of 18:17, 25 May 2012
- Outside Diameter:
- Inside Diameter: 32mm
- Length:
- Setscrew Hole Diameter: 6.8mm Thru 1 Side, M8x1.25 tap
- Setscrew Hole Spacing Along Length:
- Contact Hole Positioning: 4 equally spaced from each other.
- Contact Hole Spacing From Center:
- Contact Hole Diameter: 6.8mm Thru 1 Side, M8x1.25 tap
- 2D Image
- 3D CAD STP
- 2D Fabrication Drawing PDF
- 2D Fabrication Drawing DXF