Cold Saw/V1 Design Files/Drive Collar: Difference between revisions
< Cold Saw | V1 Design Files
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
*'''Outside Diameter: | *'''Outside Diameter: 76.2mm''' | ||
*'''Inside Diameter: 32mm''' | *'''Inside Diameter: 32mm''' | ||
*'''Length: | *'''Length: 30mm''' | ||
*'''Setscrew Hole Positioning: 4 on end face, 4 on round face, equidistant and not interfering with each other. | |||
*'''Setscrew Hole Diameter: 6.8mm Thru 1 Side, M8x1.25 tap | *'''Setscrew Hole Diameter: 6.8mm Thru 1 Side, M8x1.25 tap | ||
*'''Setscrew Hole Spacing Along Length: | *'''Face Setscrew Hole Spacing Along Length: 15mm''' | ||
*''' | *'''End Setscrew Hole Spacing From Center: 30mm''' | ||
Revision as of 18:27, 25 May 2012
- Outside Diameter: 76.2mm
- Inside Diameter: 32mm
- Length: 30mm
- Setscrew Hole Positioning: 4 on end face, 4 on round face, equidistant and not interfering with each other.
- Setscrew Hole Diameter: 6.8mm Thru 1 Side, M8x1.25 tap
- Face Setscrew Hole Spacing Along Length: 15mm
- End Setscrew Hole Spacing From Center: 30mm
- 2D Image
- 3D CAD STP
- 2D Fabrication Drawing PDF
- 2D Fabrication Drawing DXF