Cold Saw/V1 Design Files/Base Disc: Difference between revisions
< Cold Saw | V1 Design Files
Jump to navigation
Jump to search
| Line 11: | Line 11: | ||
*''' | *'''Mount Hole Diameter: 12mm''' | ||
*'''Mount Hole Spacing as Center Rectangle: 60mm by 110mm''' | |||
*'''Vise Hole Diameter: 12mm''' | |||
*'''Vise Hole Spacing as Center Rectangle: 90mm by 40mm''' | |||
Revision as of 22:52, 28 May 2012
Base Disc
- First Outside Diameter: 170mm
- First Thickness: 26mm
- Second Outside Diameter: 149.5mm
- Second Thickness: 12.1mm
- Mount Hole Diameter: 12mm
- Mount Hole Spacing as Center Rectangle: 60mm by 110mm
- Vise Hole Diameter: 12mm
- Vise Hole Spacing as Center Rectangle: 90mm by 40mm
- 2D Image
- 3D CAD STP
- 2D Fabrication Drawing PDF
- 2D Fabrication Drawing DXF