Lathe: Difference between revisions

Latest revision as of 03:48, 6 March 2009

Redirect to:

@@ Line 1: / Line 1: @@
-=Introduction=
+#redirect [[Open_Source_Lathe]]
-We are building a heavy duty lathe from scrach, based on the practical aspects of the [[Multimachine]], and powered by [[LifeTrac]]
-=Fabrication=
-**Romig bed lathe type - from Multimachine - [[Image:Romig.jpg]]
-**Simple prototype, $486 in materials BOM:
-***2 bearings, $50
-***2 mouning plates, 1/2"x6" angle - $40
-***4 Shaft Collars - $20
-***2" shaft - $20
-***DOM tubing, 3", 2" ID - $15
-***8 3/4" bolts for table - $16
-***Chuck plate - $40
-***Bolts for chuck - $20
-***Nuts and bolts for DOM - $5
-***XY table - $70 off shelf at Enco - [http://www.cartertools.com/newjose3.html]
-*** Tool post - $10
-***table plate - $30
-***2 bags of cement, 80 lb each - $20
-***sand, gravel - $10
-***'''TOTAL - $316'''
-**High performance, 2/1000" accuracy with proper technique, stock parts, 1000 lb radial and 200 lb axial load capacity
-=Links=
-*Light duty toy lathe - http://www.instructables.com/id/100-Homemade-Lathe/?ALLSTEPS
-[[Category:Global Village Construction Set]]