Cold Saw/V1 Design Files/Baseplate: Difference between revisions
< Cold Saw | V1 Design Files
Jump to navigation
Jump to search
No edit summary |
|||
| Line 1: | Line 1: | ||
=Baseplate= | =Baseplate= | ||
*'''Length: 400mm''' | |||
*'''Width: 300mm''' | |||
*'''Thickness: 25.4mm''' | |||
*'''Mount Hole Thread: M12x1.75''' | |||
*'''Fixed Block Mount Hole Spacing Along Width: 190mm, 260mm''' | |||
*'''Fixed Block Mount Hole Spacing Along Length: 275mm, 320mm''' | |||
*'''Support Block Mount Hole Spacing Along Width: 25mm, 160mm''' | |||
*'''Support Block Mount Hole Spacing Along Length: 15mm, 70mm''' | |||
*'''2D Image''' | *'''2D Image''' | ||
Revision as of 23:02, 28 May 2012
Baseplate
- Length: 400mm
- Width: 300mm
- Thickness: 25.4mm
- Mount Hole Thread: M12x1.75
- Fixed Block Mount Hole Spacing Along Width: 190mm, 260mm
- Fixed Block Mount Hole Spacing Along Length: 275mm, 320mm
- Support Block Mount Hole Spacing Along Width: 25mm, 160mm
- Support Block Mount Hole Spacing Along Length: 15mm, 70mm
- 2D Image
- 3D CAD STP
- 2D Fabrication Drawing PDF
- 2D Fabrication Drawing DXF