Cold Saw/V1 Design Files/Baseplate: Difference between revisions
< Cold Saw | V1 Design Files
Jump to navigation
Jump to search
No edit summary |
|||
Line 1: | Line 1: | ||
=Baseplate= | =Baseplate= | ||
*'''Length: | *'''Length: 609.6mm''' | ||
*'''Width: | *'''Width: 457.2mm''' | ||
*'''Thickness: 25.4mm''' | *'''Thickness: 25.4mm''' | ||
*''' | *'''Disc Hole Diameter: 10.5mm dia then M12x1.75 tap''' | ||
*'''Disc Hole Spacing Along Length: 274.8mm, 334.8mm''' | |||
*''' | *'''Disc Hole Spacing Along Width: 145mm, 255mm''' | ||
Revision as of 23:16, 28 May 2012
Baseplate
- Length: 609.6mm
- Width: 457.2mm
- Thickness: 25.4mm
- Disc Hole Diameter: 10.5mm dia then M12x1.75 tap
- Disc Hole Spacing Along Length: 274.8mm, 334.8mm
- Disc Hole Spacing Along Width: 145mm, 255mm
- 2D Image
- 3D CAD STP
- 2D Fabrication Drawing PDF
- 2D Fabrication Drawing DXF