Cold Saw/V1 Design Files/Baseplate: Difference between revisions
< Cold Saw | V1 Design Files
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
=Baseplate= | =Baseplate= | ||
*''' | *'''Thickness: 25.4mm''' | ||
*'''Width: | *'''Width: 304.8mm''' | ||
*''' | *'''Length: 457.2mm''' | ||
*'''Disc Hole | *'''Disc Hole Diameter: 10.5mm dia then M12x1.75 tap''' | ||
*'''Disc Hole Spacing Rectangle: 60mm x 110mm''' | |||
*'''Disc Hole Spacing Rectangle Along Length and Width: 228.6mm x 152.4mm''' | |||
Revision as of 18:49, 3 June 2012
Baseplate
- Thickness: 25.4mm
- Width: 304.8mm
- Length: 457.2mm
- Disc Hole Diameter: 10.5mm dia then M12x1.75 tap
- Disc Hole Spacing Rectangle: 60mm x 110mm
- Disc Hole Spacing Rectangle Along Length and Width: 228.6mm x 152.4mm
- 2D Image
- 3D CAD STP
- 2D Fabrication Drawing PDF
- 2D Fabrication Drawing DXF