Cold Saw/V1 Design Files/Base Disc: Difference between revisions
< Cold Saw | V1 Design Files
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
=Base Disc= | =Base Disc= | ||
*'''First Outside Diameter: | *'''First Outside Diameter: 152.4mm''' | ||
*'''First Thickness: 26mm''' | *'''First Thickness: 26mm''' | ||
*'''Second Outside Diameter: | *'''Second Outside Diameter: 140mm''' | ||
*'''Second Thickness: 12.1mm''' | *'''Second Thickness: 12.1mm''' | ||
| Line 13: | Line 13: | ||
*'''Mount Hole Diameter: 12mm''' | *'''Mount Hole Diameter: 12mm''' | ||
*'''Mount Hole Spacing as Center Rectangle: 60mm by | *'''Mount Hole Spacing as Center Rectangle: 60mm by 100mm''' | ||
Revision as of 19:15, 3 June 2012
Base Disc
- First Outside Diameter: 152.4mm
- First Thickness: 26mm
- Second Outside Diameter: 140mm
- Second Thickness: 12.1mm
- Mount Hole Diameter: 12mm
- Mount Hole Spacing as Center Rectangle: 60mm by 100mm
- Vise Hole Diameter: 12mm
- Vise Hole Spacing as Center Rectangle: 90mm by 40mm
- 2D Image
- 3D CAD STP
- 2D Fabrication Drawing PDF
- 2D Fabrication Drawing DXF