Cold Saw/V1 Design Files/Moving Block: Difference between revisions
< Cold Saw | V1 Design Files
Jump to navigation
Jump to search
| Line 13: | Line 13: | ||
*'''Clamp Jaw Hole Spacing Along Height: 63.5mm''' | *'''Clamp Jaw Hole Spacing Along Height: 63.5mm''' | ||
*'''Clamp Jaw Hole Diameter: | *'''Clamp Jaw Hole Diameter: 10.5mm DIA then M12x1.75 Tap''' | ||
*'''Clamp Jaw Hole Spacing Along Length: 30mm, 220mm''' | *'''Clamp Jaw Hole Spacing Along Length: 30mm, 220mm''' | ||
Revision as of 05:39, 4 June 2012
Moving Block
- Length: 250mm
- Width: 50.8mm
- Height: 76.2mm
- Clamp Axis Centerline Height: 25.4mm
- Clamp Jaw Hole Spacing Along Height: 63.5mm
- Clamp Jaw Hole Diameter: 10.5mm DIA then M12x1.75 Tap
- Clamp Jaw Hole Spacing Along Length: 30mm, 220mm
- Cutout Length: 250mm
- Cutout Width: 25.4mm
- Cutout Height: 25.4mm
- Cutout Spacing Along Width: On Side
- Cutout Length: 150mm
- Cutout Width: 25.4mm
- Cutout Height: 25.4mm
- Cutout Spacing Along Length: Centered
- 2D Image
- 3D CAD STP
- 2D Fabrication Drawing PDF
- 2D Fabrication Drawing DXF