Cold Saw/V1 Design Files/Support Bar: Difference between revisions
< Cold Saw | V1 Design Files
Jump to navigation
Jump to search
No edit summary |
|||
| Line 21: | Line 21: | ||
*'''Interface Hole Spacing Along Width: 23.5mm, 103.5mm''' | *'''Interface Hole Spacing Along Width: 23.5mm, 103.5mm''' | ||
*'''Stopper Hole Diameter: 12mm''' | |||
*'''Stopper Hole Spacing: Such that the blade bottoms out just before touching the vise; such that the drive assembly can reliably and safely sit back without being held.''' | |||
Revision as of 16:44, 5 June 2012
Support Bar
- Length: 300mm
- Width: 127mm
- Thickness: 25.4mm
- Mount Hole Diameter: 31.8mm
- Mount Hole Spacing Along Length: 260mm
- Mount Hole Spacing Along Width: 23.5mm
- Interface Hole Diameter: 12mm
- Interface Hole Spacing Along Length: 90mm, 120mm
- Interface Hole Spacing Along Width: 23.5mm, 103.5mm
- Stopper Hole Diameter: 12mm
- Stopper Hole Spacing: Such that the blade bottoms out just before touching the vise; such that the drive assembly can reliably and safely sit back without being held.
- 2D Image
- 3D CAD STP
- 2D Fabrication Drawing PDF
- 2D Fabrication Drawing DXF