Cold Saw/V1 Design Files/Support Bar: Difference between revisions
< Cold Saw | V1 Design Files
Jump to navigation
Jump to search
| Line 8: | Line 8: | ||
*''' | *'''Shaft Hole Diameter: 31.8mm''' | ||
*''' | *'''Shaft Hole Rectangle: 75mm x 80mm''' | ||
*''' | *'''Shaft Hole Spacing Along Length: 260mm''' | ||
*'''Shaft Hole Spacing Along Width: 23.5mm''' | |||
Revision as of 20:02, 5 June 2012
Support Bar
- Length: 300mm
- Width: 127mm
- Thickness: 25.4mm
- Shaft Hole Diameter: 31.8mm
- Shaft Hole Rectangle: 75mm x 80mm
- Shaft Hole Spacing Along Length: 260mm
- Shaft Hole Spacing Along Width: 23.5mm
- Interface Hole Diameter: 12mm
- Interface Hole Spacing Along Length: 90mm, 120mm
- Interface Hole Spacing Along Width: 23.5mm, 103.5mm
- Stopper Hole Diameter: 12mm
- Stopper Hole Spacing: 30mm x 45mm from Shaft Hole. (Such that the blade bottoms out just before touching the vise; such that the drive assembly can reliably and safely sit back without being held)
- Stopper Notes: Remember that the stopper screw will have a nut on it which determines the contact diameter of the stopper.
- 2D Image
- 3D CAD STP
- 2D Fabrication Drawing PDF
- 2D Fabrication Drawing DXF