Cold Saw/V1 Design Files/Interface Plate: Difference between revisions
< Cold Saw | V1 Design Files
Jump to navigation
Jump to search
No edit summary |
|||
| (4 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
=Interface Plate= | =Interface Plate= | ||
*'''Length: | *'''Length: 300mm''' | ||
*'''Width: | *'''Width: 127mm''' | ||
*'''Thickness: | *'''Thickness: 25.4mm''' | ||
*'''Drive Hole | *'''Drive Hole Diameter: 57.15mm''' | ||
*'''Motor Mount Hole Spacing Rectangle: 40mm x 100mm''' | |||
*'''Motor Mount Hole | *'''Motor Mount Hole Diameter: 10.5mm then M12x1.75''' | ||
*'''Blade Guard Mount Hole Spacing Rectangle: 100mm x 80mm''' | |||
*'''Blade Guard Mount Hole Diameter: 10.5mm then M12x1.75''' | |||
*'''Interfacing Hole Spacing Rectangle: 75mm x 80mm''' | |||
*'''Interfacing Hole Diameter: 10.5mm then M12x1.75 Tap''' | |||
*'''2D Image''' | *'''2D Image''' | ||
Latest revision as of 00:55, 8 June 2012
Interface Plate
- Length: 300mm
- Width: 127mm
- Thickness: 25.4mm
- Drive Hole Diameter: 57.15mm
- Motor Mount Hole Spacing Rectangle: 40mm x 100mm
- Motor Mount Hole Diameter: 10.5mm then M12x1.75
- Blade Guard Mount Hole Spacing Rectangle: 100mm x 80mm
- Blade Guard Mount Hole Diameter: 10.5mm then M12x1.75
- Interfacing Hole Spacing Rectangle: 75mm x 80mm
- Interfacing Hole Diameter: 10.5mm then M12x1.75 Tap
- 2D Image
- 3D CAD STP
File:ColdSawV1InterfacePlate.stp
- 2D Fabrication Drawing PDF
File:ColdSawV1InterfacePlate.pdf
- 2D Fabrication Drawing DXF