Cold Saw/V1 Design Files/Blade Guard: Difference between revisions
< Cold Saw | V1 Design Files
Jump to navigation
Jump to search
| Line 5: | Line 5: | ||
*'''Thickness: 1.5875mm''' | *'''Thickness: 1.5875mm''' | ||
*'''Width: | *'''Width: 152.4mm''' | ||
*'''Length: 946mm''' | *'''Length: 946mm''' | ||
Revision as of 01:15, 8 June 2012
Blade Guard
- Shape: Bent Flat Bar
- Thickness: 1.5875mm
- Width: 152.4mm
- Length: 946mm
- Outer Bend 90 degrees clockwise at 270mm
- Outer Bend 90 degrees clockwise at 676mm
- Mount Hole Spacing Along Width: 38.1mm
- Mount Hole Spacing Along Length: 20mm, 140mm, 806mm, 926mm
- Mount Hole Diameter: 12mm
- 2D Image
- 3D CAD STP
- 2D Fabrication Drawing PDF
- 2D Fabrication Drawing DXF