Cold Saw/V1 Design Files/Blade Guard: Difference between revisions
< Cold Saw | V1 Design Files
Jump to navigation
Jump to search
| Line 12: | Line 12: | ||
*'''Outer Bend 90 degrees clockwise at 270mm''' | *'''Outer Bend 90 degrees clockwise at 270mm''' | ||
*'''Outer Bend 90 degrees clockwise at | *'''Outer Bend 90 degrees clockwise at 670mm''' | ||
*'''Mount Hole Spacing Along Width: 38.1mm''' | *'''Mount Hole Spacing Along Width: 38.1mm''' | ||
*'''Mount Hole Spacing Along Length: 20mm, 140mm, | *'''Mount Hole Spacing Along Length: 20mm, 140mm, 800mm, 920mm''' | ||
*'''Mount Hole Diameter: 12mm''' | *'''Mount Hole Diameter: 12mm''' | ||
Revision as of 01:30, 8 June 2012
Blade Guard
- Shape: Bent Flat Bar
- Thickness: 1.5875mm
- Width: 152.4mm
- Length: 940mm
- Outer Bend 90 degrees clockwise at 270mm
- Outer Bend 90 degrees clockwise at 670mm
- Mount Hole Spacing Along Width: 38.1mm
- Mount Hole Spacing Along Length: 20mm, 140mm, 800mm, 920mm
- Mount Hole Diameter: 12mm
- 2D Image
- 3D CAD STP
- 2D Fabrication Drawing PDF
- 2D Fabrication Drawing DXF