Cold Saw/V1 Design Files/Blade Guard: Difference between revisions
< Cold Saw | V1 Design Files
Jump to navigation
Jump to search
(Created page with "=Blade Guard= *'''Shape: Bent Flat Bar''' *'''Thickness: 1.5mm''' *'''Width: 76.2mm''' *'''Length: 580mm''' *'''Bend 90 degrees at 120mm''' *'''Bend 90 degrees at 460mm'''...") |
|||
| (8 intermediate revisions by the same user not shown) | |||
| Line 3: | Line 3: | ||
*'''Shape: Bent Flat Bar''' | *'''Shape: Bent Flat Bar''' | ||
*'''Thickness: 1. | *'''Thickness: 1.5875mm''' | ||
*'''Width: | *'''Width: 152.4mm''' | ||
*'''Length: | *'''Length: 940mm''' | ||
*'''Bend 90 degrees at | *'''Outer Bend 90 degrees clockwise at 270mm''' | ||
*'''Bend 90 degrees at | *'''Outer Bend 90 degrees clockwise at 670mm''' | ||
*'''Mount Hole Spacing Along Width: | *'''Mount Hole Spacing Along Width: 40mm''' | ||
*'''Mount Hole Spacing Along Length: 20mm, | *'''Mount Hole Spacing Along Length: 20mm, 120mm, 820mm, 920mm''' | ||
*'''Mount Hole Diameter: | *'''Mount Hole Diameter: 12mm''' | ||
*'''2D Image''' | |||
[[Image: ColdSawV1BladeGuard.jpg|500px]] | |||
*'''3D CAD STP''' | |||
[[File: ColdSawV1BladeGuard.stp]] | |||
*'''2D Fabrication Drawing PDF''' | |||
[[File: ColdSawV1BladeGuard.pdf]] | |||
*'''2D Fabrication Drawing DXF''' | |||
[[File: ColdSawV1BladeGuard.dxf]] | |||
Latest revision as of 01:42, 8 June 2012
Blade Guard
- Shape: Bent Flat Bar
- Thickness: 1.5875mm
- Width: 152.4mm
- Length: 940mm
- Outer Bend 90 degrees clockwise at 270mm
- Outer Bend 90 degrees clockwise at 670mm
- Mount Hole Spacing Along Width: 40mm
- Mount Hole Spacing Along Length: 20mm, 120mm, 820mm, 920mm
- Mount Hole Diameter: 12mm
- 2D Image
- 3D CAD STP
- 2D Fabrication Drawing PDF
- 2D Fabrication Drawing DXF