Cold Saw/V1 Design Files/Blade Guard: Difference between revisions
< Cold Saw | V1 Design Files
Jump to navigation
Jump to search
| (4 intermediate revisions by the same user not shown) | |||
| Line 5: | Line 5: | ||
*'''Thickness: 1.5875mm''' | *'''Thickness: 1.5875mm''' | ||
*'''Width: | *'''Width: 152.4mm''' | ||
*'''Length: | *'''Length: 940mm''' | ||
*'''Outer Bend 90 degrees clockwise at 270mm''' | *'''Outer Bend 90 degrees clockwise at 270mm''' | ||
*'''Outer Bend 90 degrees clockwise at | *'''Outer Bend 90 degrees clockwise at 670mm''' | ||
*'''Mount Hole Spacing Along Width: | *'''Mount Hole Spacing Along Width: 40mm''' | ||
*'''Mount Hole Spacing Along Length: 20mm, | *'''Mount Hole Spacing Along Length: 20mm, 120mm, 820mm, 920mm''' | ||
*'''Mount Hole Diameter: 12mm''' | *'''Mount Hole Diameter: 12mm''' | ||
Latest revision as of 01:42, 8 June 2012
Blade Guard
- Shape: Bent Flat Bar
- Thickness: 1.5875mm
- Width: 152.4mm
- Length: 940mm
- Outer Bend 90 degrees clockwise at 270mm
- Outer Bend 90 degrees clockwise at 670mm
- Mount Hole Spacing Along Width: 40mm
- Mount Hole Spacing Along Length: 20mm, 120mm, 820mm, 920mm
- Mount Hole Diameter: 12mm
- 2D Image
- 3D CAD STP
- 2D Fabrication Drawing PDF
- 2D Fabrication Drawing DXF