Cold Saw/V1 Design Files/Base Disc: Difference between revisions
< Cold Saw | V1 Design Files
Jump to navigation
Jump to search
| (6 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
=Base Disc= | =Base Disc= | ||
*'''First Outside Diameter: | *'''First Outside Diameter: 152.4mm''' | ||
*'''First Thickness: 26mm''' | *'''First Thickness: 26mm''' | ||
*'''Second Outside Diameter: | *'''Second Outside Diameter: 127mm''' | ||
*'''Second Thickness: 12. | *'''Second Thickness: 12.1mm''' | ||
*''' | *'''Mount Hole Diameter: 12mm with 20mm DIA 13mm DEEP counterbore''' | ||
*'''Mount Hole Spacing as Center Rectangle: 60mm by 80mm''' | |||
*'''Vise Hole Diameter: 10.5mm DIA then M12x1.75 Tap''' | |||
*'''Vise Hole Spacing as Center Rectangle: 90mm by 40mm''' | |||
Latest revision as of 16:48, 8 June 2012
Base Disc
- First Outside Diameter: 152.4mm
- First Thickness: 26mm
- Second Outside Diameter: 127mm
- Second Thickness: 12.1mm
- Mount Hole Diameter: 12mm with 20mm DIA 13mm DEEP counterbore
- Mount Hole Spacing as Center Rectangle: 60mm by 80mm
- Vise Hole Diameter: 10.5mm DIA then M12x1.75 Tap
- Vise Hole Spacing as Center Rectangle: 90mm by 40mm
- 2D Image
- 3D CAD STP
- 2D Fabrication Drawing PDF
- 2D Fabrication Drawing DXF