Cold Saw/V1 Design Rationale/Hold System/Base: Difference between revisions
< Cold Saw | V1 Design Rationale | Hold System
Jump to navigation
Jump to search
| Line 11: | Line 11: | ||
*The base is rigidly mounted to the vise such that the the rigidity of the mounting surface is transferred via the base to the vise. Rigid vise mounting is a requirement of precision operation. The fastening method is the vise 4-screwed into a flat bar that is 4-screwed into a plate. The vise must be detachable from the base such that parts of the swivel mechanism can also be isolated for modularity and ease of maintenance. The flat bar is elevated from the base by spacers; the spacers should be bored rods for ease of fabrication while retaining rigidity. | *The base is rigidly mounted to the vise such that the the rigidity of the mounting surface is transferred via the base to the vise. Rigid vise mounting is a requirement of precision operation. The fastening method is the vise 4-screwed into a flat bar that is 4-screwed into a plate. The vise must be detachable from the base such that parts of the swivel mechanism can also be isolated for modularity and ease of maintenance. The flat bar is elevated from the base by spacers; the spacers should be bored rods for ease of fabrication while retaining rigidity. | ||
= | =Concept= | ||
[[Image: ColdSawV1Base.png]] | |||
Revision as of 21:34, 11 June 2012
Functions
- The main function of the base is to be the part of the Cold Saw that mounts onto an external surface. The base should be elevated enough from the mounting surface such that the swivel mechanism can be adjusted from below.
The elevation can be achieved by 4 blocks, 1 welded under each corner of the base.
Fastening can be achieved by the use of C-clamps or fasteners after drilling holes to match the pattern on the mounting surface.
- The base also functions as a smooth surface on which swiveling parts can slide on, and provides a hole through which the swivel rod can be inserted. This hole on the base acts as the center of rotation for the swivel mechanism.
- The base is rigidly mounted to the vise such that the the rigidity of the mounting surface is transferred via the base to the vise. Rigid vise mounting is a requirement of precision operation. The fastening method is the vise 4-screwed into a flat bar that is 4-screwed into a plate. The vise must be detachable from the base such that parts of the swivel mechanism can also be isolated for modularity and ease of maintenance. The flat bar is elevated from the base by spacers; the spacers should be bored rods for ease of fabrication while retaining rigidity.
Concept
