Cold Saw/V1 Design Files: Difference between revisions
< Cold Saw
Jump to navigation
Jump to search
| Line 58: | Line 58: | ||
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Long_Screw Long Screw] | [http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Long_Screw Long Screw] | ||
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Long2_Screw Long2 Screw] | |||
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Coupling_Setscrew Short Setscrew] | [http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Coupling_Setscrew Short Setscrew] | ||
Revision as of 23:25, 11 June 2012
Uniform Part Dimensions
- Plate: 25.4mm x 304.8mm (Base Plate, Swivel Plate)
- Flat Bar: 76.2mm x 50.8mm (Shaft Block, Fixed Block, Moving Block)
- Flat Bar: 25.4mm x 127mm (Support Bar, Bridge Bar, Interface Bar, Vise Jaw)
- Flat Bar: 3.175mm x 25.4mm (Blade Guard Support)
- Flat Bar: 1.6mm x 152.4mm (Blade Guard)
- Round Bar: 152.4mm DIA (Base Disc)
- Round Bar: 127mm DIA (Blade Mount Disc)
- Round Bar: 76.2mm DIA (Shaft Collar with Axial Tensioning, Large Thrust Washer)
- Round Bar: 50.8mm DIA (Shaft Coupling, Shaft Collar)
- Round Bar: 31.8mm DIA (Shaft, Operation Handle, Vise Handle)
- Round Bar: 8mm DIA (Small Rod)
- Setscrew: M8x1.25 THREAD
- Bolts and Nuts: M12x1.75 THREAD
- Threaded Rod: M30x3.5 THREAD
- Nuts: M30x3.5 THREAD
Uniform Mounting Dimensions
- Base Plate to Base Flat: 80mm x 300mm
- Base Flat to Vise: 50mm x 90mm
- Vise Rod to Rod: 95mm
- Swivel Plate to Rotary Shaft Block: 30mm x 55mm
- Support Flat to Interface Flat: 75mm x 80mm
- Hydraulic Motor to Interface Flat: 40mm x 100mm
- Blade Guard to Interface Flat: 80mm x 100mm