Cold Saw/V1 Design Files/Swivel Plate: Difference between revisions
< Cold Saw | V1 Design Files
Jump to navigation
Jump to search
| (22 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
=Swivel Plate= | =Swivel Plate= | ||
*'''Length: | *'''Length: 406.4mm''' (Long enough to support the drive assembly such that the blade is centered on the vise) | ||
*'''Width: | *'''Width: 203.2mm''' (Wide enough to fit the shaft blocks wide enough to support the drive assembly such that the blade is centered on the vise) | ||
*'''Thickness: 25.4mm''' | *'''Thickness: 25.4mm''' | ||
*'''Swivel Hole | *'''Swivel Hole Diameter: 30mm''' | ||
*'''Swivel Hole | *'''Swivel Hole Along Length; Near Edge''' | ||
*'''Swivel Hole Spacing Along Width: Centered''' | |||
Latest revision as of 22:54, 15 June 2012
Swivel Plate
- Length: 406.4mm (Long enough to support the drive assembly such that the blade is centered on the vise)
- Width: 203.2mm (Wide enough to fit the shaft blocks wide enough to support the drive assembly such that the blade is centered on the vise)
- Thickness: 25.4mm
- Swivel Hole Diameter: 30mm
- Swivel Hole Along Length; Near Edge
- Swivel Hole Spacing Along Width: Centered
- 2D Image
- 3D CAD STP
- 2D Fabrication Drawing PDF
- 2D Fabrication Drawing DXF