Cold Saw/V1 Design Rationale/Hold System/Base: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
 
(2 intermediate revisions by the same user not shown)
Line 1: Line 1:
=Notes=
*The Base Flat mounting holes should be counterbored so that the fastener heads do not interfere with the parallel top surface in case large irregular workpieces need to be mounted to the Base Flat without the Vise.
=Functions=
=Functions=


Line 15: Line 19:
[[Image: ColdSawV1Base.png]]
[[Image: ColdSawV1Base.png]]


=Calculations: Dimensions of the Mounting Rectangle between the Base Plate and the Base Flat Bar=
=Calculations=
 
We want the dimensions to enable the Cold Saw to swivel at least 90 degrees.
 
Assume that what rotates on the swivel hole will be a swivel plate, and that the swivel plate will be long towards the back of the Cold Saw.
 
Assume that the swivel plate's hole is centered along its width.
 
We are concerned about the width of that swivel plate because it is the swivel plate's width that determines the angle at which the swivel plate contacts the spacers (the ones that isolate the base plate from the base flat bar).
 
Assume that the spacer is round.
 
Let the length and width from the swivel hole to the spacer hole of the mounting rectangle be '''X''' and '''Y''', respectively.
 
Let the width of the swivel plate be '''W'''.
 
Let the radius of the spacer be '''R'''.
 
Let the swivel angle be '''A'''.
 
Let '''Angle B''', '''Length C''', '''Length D''', '''Angle E''' be placeholder variables that we use only for the calculation but do not include in the final equation.
 
[[Image: ColdSawSwivelAngle.png]]
 
We are solving for '''A'''.
 
From trigonometry, we know that '''cosine of an angle in a right triangle''' equals '''horizontal length''' divided by '''hypotenuse length.'''
 
*'''1''' So we know that the '''cos(A/2) = (W/2) / (X - Length C)'''
 
But we don't want '''Length C''' in our solution so let's put it in terms of the desired variables.
 
From trigonometry, we know that '''the length divided by the sine of its associated angle''' equals '''another length divided by the sine of its associated angle'''.
 
*'''2''' So we know that '''(Length C/sine[Angle B]) = ([Y + Length D]/sine[Angle E])'''.
 
We see that in the process of solving for '''Length C''', we've introduced 3 more placeholder variables, '''Length D''', '''Angle B''' and '''Angle E'''.
 
Let's quickly solve for these new variables in terms of what we want.
 
From trigonometry, we know that '''the sum of a triangle's inner angles''' is '''180 degrees''', equivalent to about '''3.14 radians'''.


So we know after a bit of angle calculations that '''Angle B = (A/2)''' and '''Angle E = 90deg - (A/2)'''.
*Dimensions of mounting rectangle between base plate and base flat


From trigonometry, we know that '''the hypotenuse length of a right triangle''' is equal to '''the vertical length divided by the sine of its associated angle'''.
http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Rationale/Hold_System/Base/Elevated_Mounting_Calculation


So we know that '''Length D = R / sine[Angle B]'''.
=Parts=


Filling in 3 placeholder values in '''2''', we get '''(Length C/sine[A/2]) = ([Y + [R/sine[A/2]] / sine[90deg - A/2])'''
*Base Plate


*'''3''' Simplifying, we get '''Length C = (Y(sin[A/2]) + R) / (cos[A/2])'''.
http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Baseplate


Replacing '''Length C''' in '''1''' with '''3''', we get '''cos[A/2] = (W/2) / ( X - (Y(sin[A/2]) + R) / (cos[A/2]) )'''
*Base Flat


Simplifying, we get '''Xcos(A/2) - Ysin(A/2) - R - W/2 = 0'''
http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Base_Flat

Latest revision as of 18:13, 19 June 2012

Notes

  • The Base Flat mounting holes should be counterbored so that the fastener heads do not interfere with the parallel top surface in case large irregular workpieces need to be mounted to the Base Flat without the Vise.

Functions

  • The main function of the base is to be the part of the Cold Saw that mounts onto an external surface. The base should be elevated enough from the mounting surface such that the swivel mechanism can be adjusted from below.

The elevation can be achieved by 4 blocks, 1 welded under each corner of the base.

Fastening can be achieved by the use of C-clamps or fasteners after drilling holes to match the pattern on the mounting surface.

  • The base also functions as a smooth surface on which swiveling parts can slide on, and provides a hole through which the swivel rod can be inserted. This hole on the base acts as the center of rotation for the swivel mechanism.
  • The base is rigidly mounted to the vise such that the the rigidity of the mounting surface is transferred via the base to the vise. Rigid vise mounting is a requirement of precision operation. The fastening method is the vise 4-screwed into a flat bar that is 4-screwed into a plate. The vise must be detachable from the base such that parts of the swivel mechanism can also be isolated for modularity and ease of maintenance. The flat bar is elevated from the base by spacers; the spacers should be bored rods for ease of fabrication while retaining rigidity.

Concept

ColdSawV1Base.png

Calculations

  • Dimensions of mounting rectangle between base plate and base flat

http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Rationale/Hold_System/Base/Elevated_Mounting_Calculation

Parts

  • Base Plate

http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Baseplate

  • Base Flat

http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Base_Flat

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Cold_Saw/V1_Design_Rationale/Hold_System/Base&oldid=66230"