Cold Saw/V1 Design Files: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
 
(47 intermediate revisions by the same user not shown)
Line 1: Line 1:
=Assemblies=
=Uniform Mounting Dimensions=


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Base_Assembly Base Assembly]
*'''Base Plate to Base Flat: 80mm x 520mm'''


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Vise_Assembly Vise Assembly]
*'''Base Flat to Vise: 50mm x 90mm'''


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Drive_Assembly Drive Assembly]
*'''Vise Rod to Rod: 95mm'''


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Support_Assembly Support Assembly]
*'''Support Flat to Interface Flat: 75mm x 80mm'''


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Full_Assembly Full Assembly]
*'''Hydraulic Motor to Interface Flat: 40mm x 100mm'''


=Uniform Shafts=
*'''Blade Guard to Interface Flat: 80mm x 100mm'''


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Handle Clamp Handle]
=Uniform Fasteners=


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Operation_Handle Operation Handle]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Blade_Guard_Bolt Short Bolt]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Pin Pin]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Long_Screw Long Screw]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Coupling_Pin Coupling Pin]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Long2_Screw Long2 Screw]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Support_Shaft Support Shaft]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Coupling_Setscrew Short Setscrew]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Spindle Drive Shaft]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Collar_Setscrew Long Setscrew]


=Uniform Shaft Accessories=
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Threaded_Rod Threaded Rod]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Shaft_Coupling Shaft Coupling]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Short_Threaded_Rod Short Threaded Rod]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Support_Thrust_Washer Thrust Washer]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Blade_Guard_Nut Small Nut]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Drive_Collar Large Shaft Collar]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Large_Nut Large Nut]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Pin_Collar Small Shaft Collar]
=Uniform Spacers=


=Uniform Fasteners=
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Short_Spacer Short Spacer]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Blade_Guard_Nut Nut]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Long_Spacer Long Spacer]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Blade_Guard_Bolt Short Bolt]
=Uniform Shafts=


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Interface_Bolt Long Bolt]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Handle Vise Handle]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Coupling_Setscrew Short Setscrew]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Operation_Handle Operation Handle]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Collar_Setscrew Long Setscrew]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Pin Pin]


=Base System=
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Coupling_Pin Coupling Pin]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Baseplate Baseplate]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Support_Shaft Support Shaft]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Base_Disc Base Disc]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Spindle Drive Shaft]


=Clamp System=
=Uniform Shaft Accessories=


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Fixed_Block Fixed Block]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Support_Thrust_Washer Thrust Washer]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Moving_Block Moving Block]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Large_Thrust_Washer Large Thrust Washer]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Clamp_Jaw Clamp Jaw]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Drive_Collar Large Shaft Collar]


=Support System=
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Medium_Shaft_Collar Medium Shaft Collar]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Swivel_Plate Swivel Plate]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Pin_Collar Small Shaft Collar]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Shaft_Block Shaft Block]
=Assemblies=


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Support_Bar Support Bar]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Base_Assembly Base Assembly]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Bridge_Bar Bridge Bar]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Vise_Assembly Vise Assembly]


=Drive System=
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Swivel_Assembly Swivel Assembly]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Support_Assembly Support Assembly]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Hydraulic_Motor Hydraulic Motor]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Drive_Assembly Drive Assembly]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Interface_Plate Interface Plate]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Blade_Guard_Assembly Blade Guard Assembly]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Mount_Disc Mount Disc]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Full_Assembly Full Assembly]
 
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Blade Blade]
 
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Blade_Guard_Support Blade Guard Support]
 
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Blade_Guard Blade Guard]

Latest revision as of 18:53, 20 June 2012

Uniform Mounting Dimensions

  • Base Plate to Base Flat: 80mm x 520mm
  • Base Flat to Vise: 50mm x 90mm
  • Vise Rod to Rod: 95mm
  • Support Flat to Interface Flat: 75mm x 80mm
  • Hydraulic Motor to Interface Flat: 40mm x 100mm
  • Blade Guard to Interface Flat: 80mm x 100mm

Uniform Fasteners

Short Bolt

Long Screw

Long2 Screw

Short Setscrew

Long Setscrew

Threaded Rod

Short Threaded Rod

Small Nut

Large Nut

Uniform Spacers

Short Spacer

Long Spacer

Uniform Shafts

Vise Handle

Operation Handle

Pin

Coupling Pin

Support Shaft

Drive Shaft

Uniform Shaft Accessories

Thrust Washer

Large Thrust Washer

Large Shaft Collar

Medium Shaft Collar

Small Shaft Collar

Assemblies

Base Assembly

Vise Assembly

Swivel Assembly

Support Assembly

Drive Assembly

Blade Guard Assembly

Full Assembly

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Cold_Saw/V1_Design_Files&oldid=66418"