Cold Saw/V1 Design Files: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
 
(45 intermediate revisions by the same user not shown)
Line 1: Line 1:
=Assemblies=
=Uniform Mounting Dimensions=


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Base_Assembly Base Assembly]
*'''Base Plate to Base Flat: 80mm x 520mm'''


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Vise_Assembly Vise Assembly]
*'''Base Flat to Vise: 50mm x 90mm'''


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Drive_Assembly Drive Assembly]
*'''Vise Rod to Rod: 95mm'''


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Support_Assembly Support Assembly]
*'''Support Flat to Interface Flat: 75mm x 80mm'''


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Full_Assembly Full Assembly]
*'''Hydraulic Motor to Interface Flat: 40mm x 100mm'''


=Uniform Shafts=
*'''Blade Guard to Interface Flat: 80mm x 100mm'''


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Handle Clamp Handle]
=Uniform Fasteners=


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Operation_Handle Operation Handle]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Blade_Guard_Bolt Short Bolt]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Pin Pin]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Long_Screw Long Screw]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Coupling_Pin Coupling Pin]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Long2_Screw Long2 Screw]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Support_Shaft Support Shaft]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Coupling_Setscrew Short Setscrew]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Spindle Drive Shaft]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Collar_Setscrew Long Setscrew]


=Uniform Shaft Accessories=
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Threaded_Rod Threaded Rod]
 
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Shaft_Coupling Shaft Coupling]
 
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Support_Thrust_Washer Thrust Washer]
 
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Drive_Collar Large Shaft Collar]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Pin_Collar Small Shaft Collar]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Short_Threaded_Rod Short Threaded Rod]
 
=Uniform Fasteners=


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Blade_Guard_Nut Small Nut]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Blade_Guard_Nut Small Nut]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Blade_Guard_Bolt Short Bolt]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Large_Nut Large Nut]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Interface_Bolt Long Bolt]
=Uniform Spacers=


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Coupling_Setscrew Short Setscrew]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Short_Spacer Short Spacer]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Collar_Setscrew Long Setscrew]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Long_Spacer Long Spacer]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Threaded_Rod Threaded Rod]
=Uniform Shafts=


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Large_Nut Large Nut]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Handle Vise Handle]


=Base System=
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Operation_Handle Operation Handle]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Baseplate Baseplate]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Pin Pin]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Base_Disc Base Disc]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Coupling_Pin Coupling Pin]


=Clamp System=
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Support_Shaft Support Shaft]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Fixed_Block Fixed Block]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Spindle Drive Shaft]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Moving_Block Moving Block]
=Uniform Shaft Accessories=


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Clamp_Jaw Clamp Jaw]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Support_Thrust_Washer Thrust Washer]


=Support System=
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Large_Thrust_Washer Large Thrust Washer]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Swivel_Plate Swivel Plate]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Drive_Collar Large Shaft Collar]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Shaft_Block Shaft Block]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Medium_Shaft_Collar Medium Shaft Collar]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Support_Bar Support Bar]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Pin_Collar Small Shaft Collar]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Bridge_Bar Bridge Bar]
=Assemblies=


=Drive System=
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Base_Assembly Base Assembly]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Vise_Assembly Vise Assembly]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Hydraulic_Motor Hydraulic Motor]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Swivel_Assembly Swivel Assembly]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Interface_Plate Interface Plate]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Support_Assembly Support Assembly]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Mount_Disc Mount Disc]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Drive_Assembly Drive Assembly]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Blade Blade]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Blade_Guard_Assembly Blade Guard Assembly]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Blade_Guard_Support Blade Guard Support]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Full_Assembly Full Assembly]
 
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Blade_Guard Blade Guard]

Latest revision as of 18:53, 20 June 2012

Uniform Mounting Dimensions

  • Base Plate to Base Flat: 80mm x 520mm
  • Base Flat to Vise: 50mm x 90mm
  • Vise Rod to Rod: 95mm
  • Support Flat to Interface Flat: 75mm x 80mm
  • Hydraulic Motor to Interface Flat: 40mm x 100mm
  • Blade Guard to Interface Flat: 80mm x 100mm

Uniform Fasteners

Short Bolt

Long Screw

Long2 Screw

Short Setscrew

Long Setscrew

Threaded Rod

Short Threaded Rod

Small Nut

Large Nut

Uniform Spacers

Short Spacer

Long Spacer

Uniform Shafts

Vise Handle

Operation Handle

Pin

Coupling Pin

Support Shaft

Drive Shaft

Uniform Shaft Accessories

Thrust Washer

Large Thrust Washer

Large Shaft Collar

Medium Shaft Collar

Small Shaft Collar

Assemblies

Base Assembly

Vise Assembly

Swivel Assembly

Support Assembly

Drive Assembly

Blade Guard Assembly

Full Assembly

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Cold_Saw/V1_Design_Files&oldid=66418"