Cold Saw/V1 Design Files/Shaft Coupling: Difference between revisions
< Cold Saw | V1 Design Files
Jump to navigation
Jump to search
| Line 8: | Line 8: | ||
*'''Setscrew Hole Diameter: | *'''Setscrew Hole Diameter: 10.5mm''' | ||
*'''Setscrew Hole Thread: | *'''Setscrew Hole Thread: M12x1.75''' | ||
*'''Setscrew Hole Spacing Along Length: 25mm''' | *'''Setscrew Hole Spacing Along Length: 25mm''' | ||
*'''Pin Hole Diameter: | *'''Pin Hole Diameter: 12.7mm''' | ||
*'''Pin Hole Spacing Along Length: 60mm''' | *'''Pin Hole Spacing Along Length: 60mm''' | ||
Revision as of 00:07, 23 June 2012
Shaft Coupling
- Outside Diameter: 50.8mm
- Bore: 32mm
- Length: 75mm
- Setscrew Hole Diameter: 10.5mm
- Setscrew Hole Thread: M12x1.75
- Setscrew Hole Spacing Along Length: 25mm
- Pin Hole Diameter: 12.7mm
- Pin Hole Spacing Along Length: 60mm
- Length Enclosing Hydraulic Motor Shaft: 38.26mm
- Length Enclosing Spindle: 30mm
- 2D Image
- 3D CAD STP
File:ColdSawV1ShaftCoupling.stp
- 2D Fabrication Drawing PDF
File:ColdSawV1ShaftCoupling.pdf
- 2D Fabrication Drawing DXF