Light Screen: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 10: | Line 10: | ||
Mount 4 castors near the ends of the long square tubes for mobility. | Mount 4 castors near the ends of the long square tubes for mobility. | ||
---- | |||
1/16" x 2" x 2" steel square tube of following lengths: | |||
60cm x2 as ground tubes - drill a hole for mounting castors 3cm from ends | |||
180cm x2 as vertical tubes - to be welded to the middle of the ground tubes | |||
100cm x2 as horizontal tubes - to be welded to the top and bottom of the vertical tubes | |||
Revision as of 19:24, 27 September 2012
Introduction
Action Info
Use rectangular-ish frame made of 4 square tubes welded at the corners.
Use small C-clamps to hold light curtain to frame.
Weld 2 additional long square tubes at the bottom corners for standing support parallel to the ground surface but perpendicular to the frame plane.
Mount 4 castors near the ends of the long square tubes for mobility.
1/16" x 2" x 2" steel square tube of following lengths:
60cm x2 as ground tubes - drill a hole for mounting castors 3cm from ends
180cm x2 as vertical tubes - to be welded to the middle of the ground tubes
100cm x2 as horizontal tubes - to be welded to the top and bottom of the vertical tubes