RepRap Part Sourcing: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
=Introduction= | |||
Here is a process for sourcing RepRap parts. | |||
=Sources= | |||
==Printed pieces and extruder== | |||
==Metal hardware from hardware store== | |||
==Controller and electronics - $140 kit from the US== | |||
==4 z axis stepper motors - $4.5 each at [http://www.surplusshed.com/pages/item/m2038p.html]== | |||
==Power supply== | |||
=Details= | |||
*Here is the cheap stepper Forrest found, which is suitable for my simplified z-axis design | *Here is the cheap stepper Forrest found, which is suitable for my simplified z-axis design | ||
- [http://www.surplusshed.com/pages/item/m2038p.html] | - [http://www.surplusshed.com/pages/item/m2038p.html] | ||
*http://reprap.org/bin/view/Main/PartsSupplies | *http://reprap.org/bin/view/Main/PartsSupplies | ||
[[Category:RepRap]] | [[Category:RepRap]] | ||
Revision as of 17:39, 2 April 2009
Introduction
Here is a process for sourcing RepRap parts.
Sources
Printed pieces and extruder
Metal hardware from hardware store
Controller and electronics - $140 kit from the US
4 z axis stepper motors - $4.5 each at [1]
Power supply
Details
- Here is the cheap stepper Forrest found, which is suitable for my simplified z-axis design
- [2]