RepRap Part Sourcing: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 7: | Line 7: | ||
==Metal hardware from hardware store== | ==Metal hardware from hardware store== | ||
==Controller and electronics - $140 kit from the US== | ==Controller and electronics - $140 kit from the US== | ||
*generation 3 electronics recommended - [http://reprap.org/bin/view/Main/Generation3Electronics] | |||
==4 z axis stepper motors - $4.5 each at [http://www.surplusshed.com/pages/item/m2038p.html]== | ==4 z axis stepper motors - $4.5 each at [http://www.surplusshed.com/pages/item/m2038p.html]== | ||
==Power supply== | ==Power supply== | ||
Revision as of 22:28, 2 April 2009
Introduction
Here is a process for sourcing RepRap parts.
Sources
Printed pieces and extruder
Metal hardware from hardware store
Controller and electronics - $140 kit from the US
- generation 3 electronics recommended - [1]
4 z axis stepper motors - $4.5 each at [2]
Power supply
Details
- Here is the cheap stepper Forrest found, which is suitable for my simplified z-axis design
- [3]