Digital Fabrication Diagram Standards: Difference between revisions
Jump to navigation
Jump to search
m (→Example) |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 6: | Line 6: | ||
*Embed DXF of component in Google Doc | *Embed DXF of component in Google Doc | ||
*Label both Library Parts and Parts of component | *Label both Library Parts and Parts of component | ||
*Do a tree diagram with unique part labeling. When moving to the next step, erase old labels and label only new additions. | |||
=Example= | =Example= | ||
| Line 15: | Line 16: | ||
[https://docs.google.com/spreadsheet/ccc?key=0Av4ZjQn4DHJHdGlHRlFBMFdqUDZmSzR6SlBWc043OXc#gid=0 edit] | [https://docs.google.com/spreadsheet/ccc?key=0Av4ZjQn4DHJHdGlHRlFBMFdqUDZmSzR6SlBWc043OXc#gid=0 edit] | ||
<html><img src="https://docs.google.com/drawings/pub?id=1HAU54m8PnViPFS9hcCgDiLNda2CrXAz7TQm-ioBRKHY&w= | <html><img src="https://docs.google.com/drawings/pub?id=1HAU54m8PnViPFS9hcCgDiLNda2CrXAz7TQm-ioBRKHY&w=1000&h=500"></html> | ||
[https://docs.google.com/drawings/d/1HAU54m8PnViPFS9hcCgDiLNda2CrXAz7TQm-ioBRKHY/edit edit] | [https://docs.google.com/drawings/d/1HAU54m8PnViPFS9hcCgDiLNda2CrXAz7TQm-ioBRKHY/edit edit] | ||
Latest revision as of 00:23, 13 December 2012
Standards
- Use a 100% visual diagramming method that requires no words so it is readable in any language.
- Use Google Drawings
- Document at the component/module level as part of module-based design-for-parallel-fabrication.
- Embed DXF of component in Google Doc
- Label both Library Parts and Parts of component
- Do a tree diagram with unique part labeling. When moving to the next step, erase old labels and label only new additions.
Example
See example with drawer: