Latest revision as of 04:26, 20 March 2013

CAM File

See isometric picture below for reference.

@@ Line 1: / Line 1: @@
+Linked from [[CEB Press CAM Files]]
+After this, view [[Brick Press Digital Fabrication Diagrams]]
 =CAM File=
+==Ready CAM file With Individual Objects==
+[[File:drawerCAM.dxf]]
+==Drawer With Labels==
 *[[File:Drawer1.dxf‎]] - with dimensions and part labels
+==Library Files==
+*[[File:L-D1.dxf]]
+*[[File:L-D2.dxf]]
+*[[File:L-D3.dxf]]
+*[[File:L-D4.dxf]]
+*[[File:L-D5.dxf]]
+*[[File:L-D6.dxf]]
+*[[File:L-D7.dxf]]
+*[[File:L-D8.dxf]]
+*[[File:L-D9.dxf]]
 =Drawer - Digital Master Index=
@@ Line 7: / Line 26: @@
 [https://docs.google.com/spreadsheet/ccc?key=0Av4ZjQn4DHJHdGlHRlFBMFdqUDZmSzR6SlBWc043OXc#gid=0 edit]
+<html><img src="https://docs.google.com/drawings/pub?id=1z15KNpNi8QoXn9q9jd5Zw92OSB4DxbIlt6NJvSrryFk&amp;w=600&amp;h=500"></html>
+[https://docs.google.com/drawings/d/1z15KNpNi8QoXn9q9jd5Zw92OSB4DxbIlt6NJvSrryFk/edit edit]
 =Assembly Procedure=
+See isometric picture below for reference.
+#Start with Hood
+#Place sides vertically on the side of the Hood
+#Place Compression Sides vertically
+#Fill 3 Compression Gussets between Compression Sides
+#Cover assembly with Compression Cover
+#Place Soil Chamber Wall vertically at end of Sides
+#Attach Tabs Base horizontally.
+#Attach 2 Tabs in mid of Soil Chamber Wall
+<html><img src="https://docs.google.com/drawings/pub?id=1dazLL8s_yKuu0TOHnnJ_wIysRmo7K4nhFmcKTfXRnnY&amp;w=800&amp;h=600"></html>
+[https://docs.google.com/drawings/d/1dazLL8s_yKuu0TOHnnJ_wIysRmo7K4nhFmcKTfXRnnY/edit edit]