Stepper Motor Controller Emails: Difference between revisions
Jump to navigation
Jump to search
(Created page with "=Polish Crew via Cohabitat= Please see our Open Source CNC Torch table work - we have a CNC torch table that is a copy of this: http://www.youtube.com/watch?v=yTzDtb3oKX4&li...") |
(No difference)
|
Latest revision as of 00:09, 12 May 2013
Polish Crew via Cohabitat
Please see our Open Source CNC Torch table work - we have a CNC torch table that is a copy of this:
http://www.youtube.com/watch?v=yTzDtb3oKX4&list=PL95BF12B1E4560744&index=3
That one shown is running on a controller from http://www.candcnc.com/ - and we want to open source the design.
We need the ability to run about 3-4 amps of current. We eventually need to reach 10 amps or so at 50 volts.
Please see our Extreme Design sprints - and maybe you can join us next Friday/Saturday? If not, I would like to communicate to build upon your work on open source stepper motor controllers.