OSE Sample Cuts: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 18: | Line 18: | ||
[[File:samplecutsrounded.dxf]] | [[File:samplecutsrounded.dxf]] | ||
'''Note: the large holes intersects the small holes, so the overlap lines need to be erased to create Mickey Mouse ears.''' | |||
4x4x1/4" tubing - 65" long | 4x4x1/4" tubing - 65" long | ||
Revision as of 21:19, 18 May 2013
Sample Cuts in DXF. 1" hole size. Need to resize to 1-1/16" on Mike Hill Plasma Table. Erase the borders if cutting from 1/2"x8" flats. Pin is 3". DOM used around pin is 3/4" wall, to made overall diameter of hole 4.5" - with about 3/16" allowance for weld-in. Therefore, the overall diameter within the DXF CAM file should be 4.875".
Individual Files
Flats bonding plate - 48" length, 1/2"x8" steel stock
Rounded joint plate - 48" length, 1/2"x8" steel stock
File:Samplecutsrounded.dxf Note: the large holes intersects the small holes, so the overlap lines need to be erased to create Mickey Mouse ears.
4x4x1/4" tubing - 65" long
Real Cuts
