Factor e Farm Generator Maintenance: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
No edit summary
Line 2: Line 2:




The first step is to test the voltage to ensure that it needs to be refilled. Head towards the back left corner of the workshop and find this:
The first step is to test the voltage to see if it's time for the generator to be refilled. Head towards the back left corner of the workshop and find this:
 


[[File:Generator.JPG|x300px]]
[[File:Generator.JPG|x300px]]
This one.




[[File:Generator1.JPG|x300px]]
[[File:Generator1.JPG|x300px]]
Turn this on and see 0.00.




[[File:Generator2.JPG|x300px]]
[[File:Generator2.JPG|x300px]]
Find the red and black wires sitting on top.




[[File:Generator3.JPG|x300px]]
[[File:Generator3.JPG|x300px]]
Place the red wire here.




[[File:Generator4.JPG|x300px]]
[[File:Generator4.JPG|x300px]]
While holding the red wire in place, put the black wire here.




[[File:Generator6.JPG|x300px]]
[[File:Generator6.JPG|x300px]]
As you do this, a number should pop up on the reader. It's good to keep this above 11.50.
If it's below 12.00, the generator can use a refilling.




[[File:Generator7.JPG|x300px]]
[[File:Generator7.JPG|x300px]]
This is the generator. Uses gasoline (unleaded) and motor oil.




[[File:Generator9.JPG|x300px]]
[[File:Generator9.JPG|x300px]]
This is the gasoline (uses about 2.5 gallons at a time).




[[File:Generator10.JPG|x300px]]
[[File:Generator10.JPG|x300px]]
This is the motor oil (uses about half a quart at a time).




[[File:Generator11.JPG|x300px]]
[[File:Generator11.JPG|x300px]]
Measure the oil level with this.





Revision as of 04:54, 10 June 2013

This page is designed to give new visitors to Factor e Farm a simple, step-by-step guide as to how to run the power generator on site.


The first step is to test the voltage to see if it's time for the generator to be refilled. Head towards the back left corner of the workshop and find this:


Generator.JPG


This one.


Generator1.JPG


Turn this on and see 0.00.


Generator2.JPG


Find the red and black wires sitting on top.


Generator3.JPG


Place the red wire here.


Generator4.JPG


While holding the red wire in place, put the black wire here.


Generator6.JPG


As you do this, a number should pop up on the reader. It's good to keep this above 11.50.

If it's below 12.00, the generator can use a refilling.


Generator7.JPG


This is the generator. Uses gasoline (unleaded) and motor oil.


Generator9.JPG


This is the gasoline (uses about 2.5 gallons at a time).


Generator10.JPG


This is the motor oil (uses about half a quart at a time).


Generator11.JPG


Measure the oil level with this.


Generator12.JPG


Generator14.JPG


Generator16.JPG


Generator18.JPG


Generator19.JPG


Generator17.JPG


Generator13.JPG


Generator15.JPG