Power Cube - Build Videos: Difference between revisions
(Created page with "<html><iframe width="420" height="315" src="//www.youtube.com/embed/GWmdYuHv_9M" frameborder="0" allowfullscreen></iframe></html>") |
No edit summary |
||
| (13 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
This is the second power cube being mounted on LifeTrac 6 - Sep 24, 2013. | |||
Using cutting stops, it takes 40 minutes to cut with torch and grind edges of 12 Power Cube frame members, 32", 40", 48" long - out of 10' stock sections. | |||
<html><iframe width="420" height="315" src="//www.youtube.com/embed/GWmdYuHv_9M" frameborder="0" allowfullscreen></iframe></html> | <html><iframe width="420" height="315" src="//www.youtube.com/embed/GWmdYuHv_9M" frameborder="0" allowfullscreen></iframe></html> | ||
(15 sec = 40 minutes on time lapse every 5 seconds) | |||
Then you build the frame around a 27 hp Power Cube: | |||
<html><iframe width="420" height="315" src="//www.youtube.com/embed/9FmNqjay4nU" frameborder="0" allowfullscreen></iframe></html> | |||
(1 hour 15 minutes) | |||
<html><iframe width="800" height="600" src="//www.youtube.com/embed/IMfLy0E-h-s" frameborder="0" allowfullscreen></iframe></html> | |||
(45 minutes. Most of the 2 hours was spent on shifting tubes and figuring out bolt pattern in real life. Expected build time (inserting and mounting 24 bolts, plus 8 bolts for stabilizing plates for Power Cube) once procedure is set is under 1 hour.) | |||
Then you bring the tractor in: | |||
<html><iframe width="420" height="315" src="//www.youtube.com/embed/V3Ew-wOqx4Y" frameborder="0" allowfullscreen></iframe></html> | |||
(1 hour 6 minutes - included remounting loose power cube (1) on LT 6, replacing 2 bolts on the LT 6 power cube compartment, and replacing 4 bolts on the Power Cube (2) - to remove bolt conflicts) | |||
And mount the Power Cube on the tractor: | |||
<html><iframe width="420" height="315" src="//www.youtube.com/embed/IavPeQRSLgw" frameborder="0" allowfullscreen></iframe></html> | |||
(about 15 minutes to shake bolts around into holes so they align - 4 bolts, 1"x6" long - were used to mount the frame on.) | |||
Latest revision as of 17:19, 13 October 2013
This is the second power cube being mounted on LifeTrac 6 - Sep 24, 2013.
Using cutting stops, it takes 40 minutes to cut with torch and grind edges of 12 Power Cube frame members, 32", 40", 48" long - out of 10' stock sections.
(15 sec = 40 minutes on time lapse every 5 seconds)
Then you build the frame around a 27 hp Power Cube:
(1 hour 15 minutes)
(45 minutes. Most of the 2 hours was spent on shifting tubes and figuring out bolt pattern in real life. Expected build time (inserting and mounting 24 bolts, plus 8 bolts for stabilizing plates for Power Cube) once procedure is set is under 1 hour.)
Then you bring the tractor in:
(1 hour 6 minutes - included remounting loose power cube (1) on LT 6, replacing 2 bolts on the LT 6 power cube compartment, and replacing 4 bolts on the Power Cube (2) - to remove bolt conflicts)
And mount the Power Cube on the tractor:
(about 15 minutes to shake bolts around into holes so they align - 4 bolts, 1"x6" long - were used to mount the frame on.)