Ironworker 3/Bill of Materials: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| (3 intermediate revisions by 2 users not shown) | |||
| Line 1: | Line 1: | ||
{{GVCS Header}} | {{GVCS Header}} | ||
<!--START OF GENERATED BOM. Copy from here until the end into the wiki.--> | |||
<pre> | |||
This BOM was generated from the dozuki guides on 2013-11-16 17:25:37.081000 | |||
WARNING: If you hand-edit this list, your changes will be lost when the BOM is regenerated. If anything is wrong, you should update the parts entries in dozuki, fix bom_generator.py, or make a note in a section other than the generated list. | |||
Count Part | |||
----- ---- | |||
2 1" x 2" bolts | |||
2 1" x 6" bolts | |||
10 1" x 7" bolts | |||
14 1" x 8" bolts | |||
2 10" x 1" hardened bolts | |||
20 7" x 1" bolts | |||
6 8" x 1" bolts | |||
4 pivot plates without bushings | |||
4.5 ounces of grease | |||
1 oz grease | |||
107 1" nuts | |||
6 1 hole x 5 hole plates | |||
1 1" x 8" x 16" plate | |||
4 2 hole x 2 hole plates | |||
6 2 hole x 3 hole plates | |||
16 2 hole x 4 hole plates | |||
8 pivot plates | |||
2 1" x TODO" threaded robs | |||
2 1" x 15" threaded rods | |||
5 1" x 16" threaded rods | |||
4 13" x 1" threaded rods | |||
4 14" x 1" threaded rods | |||
3 15" x 1" threaded rods | |||
1 16.5" x 1" threaded rod | |||
2 26" x 1" threaded rods | |||
1 3" x 8" solid shaft | |||
2 1" springs | |||
2 1 hole 0.5" tubes | |||
2 1 hole 1/2" tubes | |||
1 1/2" 12 hole tube | |||
2 12 hole 1/2" tubes | |||
1 14 hole 1/2" tube | |||
1 17 hole 1/2" tube | |||
5 19 hole 1/2" tubes | |||
4 2 hole long 1/4" tubes | |||
1 4 hole, 0.25" tube | |||
2 6 hole, 0.25" tubes | |||
59 1" washers | |||
Count: 2, Part: 1" x 2" bolts | Count: 2, Part: 1" x 2" bolts | ||
Used by: How to assemble all the pieces of the Ironworker (in progress), step 14 | Used by: How to assemble all the pieces of the Ironworker (in progress), step 14 | ||
Count: 2, Part: 1" x 6" bolts | Count: 2, Part: 1" x 6" bolts | ||
Used by: How to assemble the shear table of the Ironworker (in progress), step 6 | Used by: How to assemble the shear table of the Ironworker (in progress), step 6 | ||
Count: | Count: 10, Part: 1" x 7" bolts | ||
Used by: How to assemble the top frame of the Ironworker (in progress), step 7 | Used by: How to assemble the top frame of the Ironworker (in progress), step 7 | ||
Used by: How to assemble all the pieces of the Ironworker (in progress), step 18 | |||
Count: 14, Part: 1" x 8" bolts | Count: 14, Part: 1" x 8" bolts | ||
Used by: How to assemble the bottom frame of the Ironworker (in progress), step 7 | Used by: How to assemble the bottom frame of the Ironworker (in progress), step 7 | ||
| Line 26: | Line 62: | ||
Used by: How to assemble all the pieces of the Ironworker (in progress), step 5 | Used by: How to assemble all the pieces of the Ironworker (in progress), step 5 | ||
Used by: How to assemble all the pieces of the Ironworker (in progress), step 4 | Used by: How to assemble all the pieces of the Ironworker (in progress), step 4 | ||
Count: | Count: 20, Part: 7" x 1" bolts | ||
Used by: How to assemble all the pieces of the Ironworker (in progress), step 20 | Used by: How to assemble all the pieces of the Ironworker (in progress), step 20 | ||
Used by: How to assemble the bottom frame of the Ironworker (in progress), step 5 | Used by: How to assemble the bottom frame of the Ironworker (in progress), step 5 | ||
Used by: How to assemble the bottom frame of the Ironworker (in progress), step 2 | Used by: How to assemble the bottom frame of the Ironworker (in progress), step 2 | ||
Count: 6, Part: 8" x 1" bolts | Count: 6, Part: 8" x 1" bolts | ||
| Line 35: | Line 70: | ||
Count: 4, Part: pivot plates without bushings | Count: 4, Part: pivot plates without bushings | ||
Used by: How to assemble the top frame of the Ironworker (in progress), step 6 | Used by: How to assemble the top frame of the Ironworker (in progress), step 6 | ||
Count: 4.5, Part: ounces of | Count: 4.5, Part: ounces of grease | ||
Used by: How to assemble the bottom frame of the Ironworker (in progress), step 12 | Used by: How to assemble the bottom frame of the Ironworker (in progress), step 12 | ||
Used by: How to assemble the top frame of the Ironworker (in progress), step 4 | Used by: How to assemble the top frame of the Ironworker (in progress), step 4 | ||
Used by: How to assemble all the pieces of the Ironworker (in progress), step 25 | Used by: How to assemble all the pieces of the Ironworker (in progress), step 25 | ||
Count: 1, Part: oz | Count: 1, Part: oz grease | ||
Used by: How to assemble all the pieces of the Ironworker (in progress), step 9 | Used by: How to assemble all the pieces of the Ironworker (in progress), step 9 | ||
Count: 107, Part: 1" nuts | Count: 107, Part: 1" nuts | ||
| Line 68: | Line 103: | ||
Used by: How to assemble all the pieces of the Ironworker (in progress), step 26 | Used by: How to assemble all the pieces of the Ironworker (in progress), step 26 | ||
Used by: How to assemble the top frame of the Ironworker (in progress), step 10 | Used by: How to assemble the top frame of the Ironworker (in progress), step 10 | ||
Count: | Count: 6, Part: 1 hole x 5 hole plates | ||
Used by: How to assemble all the pieces of the Ironworker (in progress), step 16 | Used by: How to assemble all the pieces of the Ironworker (in progress), step 16 | ||
Count: 1, Part: 1" x 8" x 16" | Count: 1, Part: 1" x 8" x 16" plate | ||
Used by: How to assemble all the pieces of the Ironworker (in progress), step 12 | Used by: How to assemble all the pieces of the Ironworker (in progress), step 12 | ||
Count: 4, Part: 2 hole x 2 hole plates | Count: 4, Part: 2 hole x 2 hole plates | ||
| Line 93: | Line 128: | ||
Used by: How to assemble all the pieces of the Ironworker (in progress), step 28 | Used by: How to assemble all the pieces of the Ironworker (in progress), step 28 | ||
Used by: How to assemble the shear table of the Ironworker (in progress), step 4 | Used by: How to assemble the shear table of the Ironworker (in progress), step 4 | ||
Count: 4, Part: 13" x 1" threaded rods | Count: 4, Part: 13" x 1" threaded rods | ||
Used by: How to assemble the bottom frame of the Ironworker (in progress), step 6 | Used by: How to assemble the bottom frame of the Ironworker (in progress), step 6 | ||
| Line 101: | Line 134: | ||
Count: 3, Part: 15" x 1" threaded rods | Count: 3, Part: 15" x 1" threaded rods | ||
Used by: How to assemble all the pieces of the Ironworker (in progress), step 26 | Used by: How to assemble all the pieces of the Ironworker (in progress), step 26 | ||
Count: 1, Part: 16.5" x 1" threaded | Count: 1, Part: 16.5" x 1" threaded rod | ||
Used by: How to assemble all the pieces of the Ironworker (in progress), step 19 | Used by: How to assemble all the pieces of the Ironworker (in progress), step 19 | ||
Count: 2, Part: 26" x 1" threaded rods | Count: 2, Part: 26" x 1" threaded rods | ||
Used by: How to assemble the bottom frame of the Ironworker (in progress), step 8 | Used by: How to assemble the bottom frame of the Ironworker (in progress), step 8 | ||
Count: 1, Part: 3" x 8" solid | Count: 1, Part: 3" x 8" solid shaft | ||
Used by: How to assemble all the pieces of the Ironworker (in progress), step 8 | Used by: How to assemble all the pieces of the Ironworker (in progress), step 8 | ||
Count: 2, Part: 1" springs | Count: 2, Part: 1" springs | ||
| Line 113: | Line 146: | ||
Count: 2, Part: 1 hole 1/2" tubes | Count: 2, Part: 1 hole 1/2" tubes | ||
Used by: How to assemble all the pieces of the Ironworker (in progress), step 10 | Used by: How to assemble all the pieces of the Ironworker (in progress), step 10 | ||
Count: 1, Part: 1/2" 12 hole | Count: 1, Part: 1/2" 12 hole tube | ||
Used by: How to assemble all the pieces of the Ironworker (in progress), step 27 | Used by: How to assemble all the pieces of the Ironworker (in progress), step 27 | ||
Count: 2, Part: 12 hole 1/2" tubes | Count: 2, Part: 12 hole 1/2" tubes | ||
Used by: How to assemble all the pieces of the Ironworker (in progress), step 28 | Used by: How to assemble all the pieces of the Ironworker (in progress), step 28 | ||
Count: 1, Part: 14 hole 1/2" | Count: 1, Part: 14 hole 1/2" tube | ||
Used by: How to assemble the bottom frame of the Ironworker (in progress), step 1 | Used by: How to assemble the bottom frame of the Ironworker (in progress), step 1 | ||
Count: 1, Part: 17 hole 1/2" | Count: 1, Part: 17 hole 1/2" tube | ||
Used by: How to assemble the top frame of the Ironworker (in progress), step 1 | Used by: How to assemble the top frame of the Ironworker (in progress), step 1 | ||
Count: 5, Part: 19 hole 1/2" tubes | Count: 5, Part: 19 hole 1/2" tubes | ||
| Line 126: | Line 159: | ||
Count: 4, Part: 2 hole long 1/4" tubes | Count: 4, Part: 2 hole long 1/4" tubes | ||
Used by: How to assemble the bottom frame of the Ironworker (in progress), step 9 | Used by: How to assemble the bottom frame of the Ironworker (in progress), step 9 | ||
Count: 1, Part: 4 hole, 0.25" | Count: 1, Part: 4 hole, 0.25" tube | ||
Used by: How to assemble the shear table of the Ironworker (in progress), step 6 | Used by: How to assemble the shear table of the Ironworker (in progress), step 6 | ||
Count: 2, Part: 6 hole, 0.25" tubes | Count: 2, Part: 6 hole, 0.25" tubes | ||
| Line 148: | Line 181: | ||
Used by: How to assemble the top frame of the Ironworker (in progress), step 10 | Used by: How to assemble the top frame of the Ironworker (in progress), step 10 | ||
Used by: How to assemble all the pieces of the Ironworker (in progress), step 14 | Used by: How to assemble all the pieces of the Ironworker (in progress), step 14 | ||
Used by: How to assemble all the pieces of the Ironworker (in progress), step 26 | Used by: How to assemble all the pieces of the Ironworker (in progress), step 26 | ||
</pre> | </pre> | ||
<!--END OF GENERATED BOM.--> | |||
Latest revision as of 12:08, 14 January 2014
| Ironworker 3 | ||
|---|---|---|
| Home | Research & Development | Bill of Materials | Manufacturing Instructions | User's Manual | User Reviews | 
| |
This BOM was generated from the dozuki guides on 2013-11-16 17:25:37.081000
WARNING: If you hand-edit this list, your changes will be lost when the BOM is regenerated. If anything is wrong, you should update the parts entries in dozuki, fix bom_generator.py, or make a note in a section other than the generated list.
Count Part
----- ----
2 1" x 2" bolts
2 1" x 6" bolts
10 1" x 7" bolts
14 1" x 8" bolts
2 10" x 1" hardened bolts
20 7" x 1" bolts
6 8" x 1" bolts
4 pivot plates without bushings
4.5 ounces of grease
1 oz grease
107 1" nuts
6 1 hole x 5 hole plates
1 1" x 8" x 16" plate
4 2 hole x 2 hole plates
6 2 hole x 3 hole plates
16 2 hole x 4 hole plates
8 pivot plates
2 1" x TODO" threaded robs
2 1" x 15" threaded rods
5 1" x 16" threaded rods
4 13" x 1" threaded rods
4 14" x 1" threaded rods
3 15" x 1" threaded rods
1 16.5" x 1" threaded rod
2 26" x 1" threaded rods
1 3" x 8" solid shaft
2 1" springs
2 1 hole 0.5" tubes
2 1 hole 1/2" tubes
1 1/2" 12 hole tube
2 12 hole 1/2" tubes
1 14 hole 1/2" tube
1 17 hole 1/2" tube
5 19 hole 1/2" tubes
4 2 hole long 1/4" tubes
1 4 hole, 0.25" tube
2 6 hole, 0.25" tubes
59 1" washers
Count: 2, Part: 1" x 2" bolts
Used by: How to assemble all the pieces of the Ironworker (in progress), step 14
Count: 2, Part: 1" x 6" bolts
Used by: How to assemble the shear table of the Ironworker (in progress), step 6
Count: 10, Part: 1" x 7" bolts
Used by: How to assemble the top frame of the Ironworker (in progress), step 7
Used by: How to assemble all the pieces of the Ironworker (in progress), step 18
Count: 14, Part: 1" x 8" bolts
Used by: How to assemble the bottom frame of the Ironworker (in progress), step 7
Used by: How to assemble the top frame of the Ironworker (in progress), step 2
Used by: How to assemble the top frame of the Ironworker (in progress), step 8
Count: 2, Part: 10" x 1" hardened bolts
Used by: How to assemble all the pieces of the Ironworker (in progress), step 5
Used by: How to assemble all the pieces of the Ironworker (in progress), step 4
Count: 20, Part: 7" x 1" bolts
Used by: How to assemble all the pieces of the Ironworker (in progress), step 20
Used by: How to assemble the bottom frame of the Ironworker (in progress), step 5
Used by: How to assemble the bottom frame of the Ironworker (in progress), step 2
Count: 6, Part: 8" x 1" bolts
Used by: How to assemble the bottom frame of the Ironworker (in progress), step 3
Count: 4, Part: pivot plates without bushings
Used by: How to assemble the top frame of the Ironworker (in progress), step 6
Count: 4.5, Part: ounces of grease
Used by: How to assemble the bottom frame of the Ironworker (in progress), step 12
Used by: How to assemble the top frame of the Ironworker (in progress), step 4
Used by: How to assemble all the pieces of the Ironworker (in progress), step 25
Count: 1, Part: oz grease
Used by: How to assemble all the pieces of the Ironworker (in progress), step 9
Count: 107, Part: 1" nuts
Used by: How to assemble the shear table of the Ironworker (in progress), step 1
Used by: How to assemble the shear table of the Ironworker (in progress), step 3
Used by: How to assemble the shear table of the Ironworker (in progress), step 2
Used by: How to assemble the shear table of the Ironworker (in progress), step 4
Used by: How to assemble the shear table of the Ironworker (in progress), step 6
Used by: How to assemble the top frame of the Ironworker (in progress), step 8
Used by: How to assemble the top frame of the Ironworker (in progress), step 6
Used by: How to assemble the top frame of the Ironworker (in progress), step 7
Used by: How to assemble the bottom frame of the Ironworker (in progress), step 10
Used by: How to assemble the top frame of the Ironworker (in progress), step 2
Used by: How to assemble all the pieces of the Ironworker (in progress), step 8
Used by: How to assemble all the pieces of the Ironworker (in progress), step 3
Used by: How to assemble all the pieces of the Ironworker (in progress), step 5
Used by: How to assemble all the pieces of the Ironworker (in progress), step 4
Used by: How to assemble all the pieces of the Ironworker (in progress), step 19
Used by: How to assemble all the pieces of the Ironworker (in progress), step 18
Used by: How to assemble the bottom frame of the Ironworker (in progress), step 9
Used by: How to assemble the bottom frame of the Ironworker (in progress), step 7
Used by: How to assemble the bottom frame of the Ironworker (in progress), step 5
Used by: How to assemble the bottom frame of the Ironworker (in progress), step 3
Used by: How to assemble the bottom frame of the Ironworker (in progress), step 2
Used by: How to assemble all the pieces of the Ironworker (in progress), step 28
Used by: How to assemble all the pieces of the Ironworker (in progress), step 22
Used by: How to assemble all the pieces of the Ironworker (in progress), step 24
Used by: How to assemble all the pieces of the Ironworker (in progress), step 26
Used by: How to assemble the top frame of the Ironworker (in progress), step 10
Count: 6, Part: 1 hole x 5 hole plates
Used by: How to assemble all the pieces of the Ironworker (in progress), step 16
Count: 1, Part: 1" x 8" x 16" plate
Used by: How to assemble all the pieces of the Ironworker (in progress), step 12
Count: 4, Part: 2 hole x 2 hole plates
Used by: How to assemble the top frame of the Ironworker (in progress), step 5
Count: 6, Part: 2 hole x 3 hole plates
Used by: How to assemble the top frame of the Ironworker (in progress), step 7
Used by: How to assemble the top frame of the Ironworker (in progress), step 8
Count: 16, Part: 2 hole x 4 hole plates
Used by: How to assemble the bottom frame of the Ironworker (in progress), step 6
Used by: How to assemble the bottom frame of the Ironworker (in progress), step 5
Used by: How to assemble the top frame of the Ironworker (in progress), step 2
Used by: How to assemble the bottom frame of the Ironworker (in progress), step 3
Used by: How to assemble the bottom frame of the Ironworker (in progress), step 2
Count: 8, Part: pivot plates
Used by: How to assemble the top frame of the Ironworker (in progress), step 4
Used by: How to assemble the bottom frame of the Ironworker (in progress), step 10
Count: 2, Part: 1" x TODO" threaded robs
Used by: How to assemble the shear table of the Ironworker (in progress), step 1
Count: 2, Part: 1" x 15" threaded rods
Used by: How to assemble the top frame of the Ironworker (in progress), step 10
Count: 5, Part: 1" x 16" threaded rods
Used by: How to assemble all the pieces of the Ironworker (in progress), step 28
Used by: How to assemble the shear table of the Ironworker (in progress), step 4
Count: 4, Part: 13" x 1" threaded rods
Used by: How to assemble the bottom frame of the Ironworker (in progress), step 6
Count: 4, Part: 14" x 1" threaded rods
Used by: How to assemble the top frame of the Ironworker (in progress), step 3
Count: 3, Part: 15" x 1" threaded rods
Used by: How to assemble all the pieces of the Ironworker (in progress), step 26
Count: 1, Part: 16.5" x 1" threaded rod
Used by: How to assemble all the pieces of the Ironworker (in progress), step 19
Count: 2, Part: 26" x 1" threaded rods
Used by: How to assemble the bottom frame of the Ironworker (in progress), step 8
Count: 1, Part: 3" x 8" solid shaft
Used by: How to assemble all the pieces of the Ironworker (in progress), step 8
Count: 2, Part: 1" springs
Used by: How to assemble the shear table of the Ironworker (in progress), step 2
Count: 2, Part: 1 hole 0.5" tubes
Used by: How to assemble the shear table of the Ironworker (in progress), step 1
Count: 2, Part: 1 hole 1/2" tubes
Used by: How to assemble all the pieces of the Ironworker (in progress), step 10
Count: 1, Part: 1/2" 12 hole tube
Used by: How to assemble all the pieces of the Ironworker (in progress), step 27
Count: 2, Part: 12 hole 1/2" tubes
Used by: How to assemble all the pieces of the Ironworker (in progress), step 28
Count: 1, Part: 14 hole 1/2" tube
Used by: How to assemble the bottom frame of the Ironworker (in progress), step 1
Count: 1, Part: 17 hole 1/2" tube
Used by: How to assemble the top frame of the Ironworker (in progress), step 1
Count: 5, Part: 19 hole 1/2" tubes
Used by: How to assemble the bottom frame of the Ironworker (in progress), step 1
Used by: How to assemble the top frame of the Ironworker (in progress), step 1
Count: 4, Part: 2 hole long 1/4" tubes
Used by: How to assemble the bottom frame of the Ironworker (in progress), step 9
Count: 1, Part: 4 hole, 0.25" tube
Used by: How to assemble the shear table of the Ironworker (in progress), step 6
Count: 2, Part: 6 hole, 0.25" tubes
Used by: How to assemble the shear table of the Ironworker (in progress), step 3
Used by: How to assemble the shear table of the Ironworker (in progress), step 5
Count: 59, Part: 1" washers
Used by: How to assemble the shear table of the Ironworker (in progress), step 3
Used by: How to assemble the shear table of the Ironworker (in progress), step 2
Used by: How to assemble the shear table of the Ironworker (in progress), step 5
Used by: How to assemble the shear table of the Ironworker (in progress), step 4
Used by: How to assemble the shear table of the Ironworker (in progress), step 6
Used by: How to assemble all the pieces of the Ironworker (in progress), step 24
Used by: How to assemble all the pieces of the Ironworker (in progress), step 5
Used by: How to assemble all the pieces of the Ironworker (in progress), step 4
Used by: How to assemble all the pieces of the Ironworker (in progress), step 20
Used by: How to assemble all the pieces of the Ironworker (in progress), step 28
Used by: How to assemble all the pieces of the Ironworker (in progress), step 22
Used by: How to assemble all the pieces of the Ironworker (in progress), step 19
Used by: How to assemble all the pieces of the Ironworker (in progress), step 18
Used by: How to assemble the bottom frame of the Ironworker (in progress), step 9
Used by: How to assemble the top frame of the Ironworker (in progress), step 10
Used by: How to assemble all the pieces of the Ironworker (in progress), step 14
Used by: How to assemble all the pieces of the Ironworker (in progress), step 26