LifeTrac II (shortened) hydraulic parts list

Complete detailed parts list [1]

Note that the following list involves 2 loaders. For a simpler version, a single front loader is sufficient. Two loaders are used for extreme flexibility.

(download Blender file here)

Main

Parts from Surplus Center:

- Total cost: $3845.14
- Order weighs: 739 lbs
- Shipping cost to Factor e Farm: $156.52

Note: Green indicates finalized shopping list from Surplus Center. Blue indicates list from McMaster Carr. Red is Dalton Hydralics. See Parts Sourcing for contact information.

1. [8] 1-7/8" Flange Bearings - [2] or 2-1/2" Flange Bearings [3]
2. [2] Front Loader cylinders - 36" [4]
3. [4] 3/8 NPTM x 1/2 NPTF 90 SWIVEL [5]
4. [4] QA plate hydraulic cylinders & 2 Rear Loader [6]
5. [4] Motors [7]
6. [10] SAE M 10 to NPT M 1/2" [8]
7. [4] SAE 4M TO 1/4" NPTM CONNECTOR for Case Drains [9]
8. [22] 1/2" QCs [10]
9. [4] 1/4" QC for motors [11]
10. [2] 1-1/4 SHAFT COUPLER W 5/16" KEYWAY - [12]
11. [2] 1-3/8" 6T fully splined shafting - [13]
12. [2] Female 1-3/8" 6T spline coupling - [14], $30 each
13. [12] 1.875" double split shaft collars - [15]
    1. got 10 double split
    2. got 2 single split - [16]
14. [8] 3/8" NPTM x 1/2" NPTF swivel - [17]
15. [1] 3-spool motor valve, 25 gpm - [18], $288
16. [5] 1/2" NPT M to NPT M 90deg Elbow [19]
17. [4] 3/4" NPT quick couplers - Dalton Hydraulics - 2 for in/out, 2 for auxiliary work ports
18. [5] 3/4 NPT hex nips [20] - in and out of valve
19. [4] 3/4 NPT to 1/2 NPT bushing [21] - auxiliary work ports

OSE Danfoss Black 2 Spool

• [4] SAE 8M TO 1/2" NPTM CONNECTOR for working ports [22]
• [1] SAE 10 PLUG for OSE BLACK 2 Spool [23]

3 Spool Husco

• [1] 3/4" NPT quick couplers - Dalton Hydraulics - 1 pair for inlet
• [1] 1/2"-1/4" bushing - to accept case drain return [24]
• Pipe cross fitting on the return line to accommodate case drain return - [25]

2 Spool Prince Valve

• [1] 3/4" Quick Coupler for outlet (already included in central 3-spool motor valve)
• [1] 3/4" NPT tee (already have these) for inlet

Cushion Valves

• [2] 1/2 NPT 30 GPM 1500-3000 PSI HYD CUSHION VALVES - [26]
• [9] 1/2" male QC tips [27]
• [2] 1/2 NPTM x 1/2 NPTF swivel [28] for cushion valve to mount tees, for separating to right and left cylinders; only one swivel needed per cushion valve
• [13] 1/2" hex nips - [29]
• [12] NPTF 1/2" Tee's [30]

Power Cube

• [1] Coupler half, 5/8" - $10
• [1] Coupler half, 1" - $10
• [1] Solid spider - $14
• [1] Breather cap - [31] - $8
  • [1] 3/4 NPT coupling - found at big box hardware stores
• [1] Suction strainer, 2" tp 1-1/4" - [32] - $23
  • Use for dual Power Cubes
  • [1] Use 2" coupler from bix box store to thread into Power Cube frame
• [1] Pressure relief for power cube bypass- [33]

Hoses

• [4] 1/2" X 12" 1/2 NPTM X 1/2 NPTM 3000 PSI HYD HOSE [34]
• [10] 1/2" X 36" 1/2 NPTM X 1/2 NPTM 3000 PSI HYD HOSE [35]
• [9] 1/2" X 48" 1/2 NPTM X 1/2 NPTM 3000 PSI HYD HOSE [36]
• [2] 1/2" X 60" 1/2 NPTM X 1/2 NPTM 3000 PSI HYD HOSE [37]
• [1] 1/2" X 84" 1/2 NPTM X 1/2 NPTM 3000 PSI HYD HOSE [38]
• [1] 1/2" X 96" 1/2 NPTM X 1/2 NPTM 3000 PSI HYD HOSE [39]
• [3] 1/2" X 120" 1/2 NPTM X 1/2 NPTM 3000 PSI HYD HOSE [40]
• [2] 1/2" X 144" NPTM 3000 PSI HYD HOSE [41]

Motor Case Drains

• [2] 1/4" X 72" NPTM 2750 PSI HYD HOSE to run parallel with tractor sides [42]
• [1] 1/4" X 30" NPTM 2750 PSI HYD HOSE from Tee to Tee in return hose [43]
• [1] 1/4" X 36" NPTM 2750 PSI HYD HOSE to Rear Motors [44]
• [3] 1/4 X 1/4 X 1/4 NPTF TEE [45]
• [3] 1/4 NPT hex nipples [46]
• [4] 1/4" NPT quick couplers are already with the motors

Seat

• [1] Tractor Seat [47]

Wheel bearings

Front loader cylinder

Front loader cylinder fittings

Rear loader cylinder

|

Rear loader cylinder fittings

Quick attach plate cylinder

Wheel motors

Wheel motor fittings

File:Lt2wheelmotorcdfittings.jpg

Wheel motor case drain fittings

Spline coupler, female part

Spline shaft, male

Wheel motor shaft coupler

Shaft collars, 3 per wheel

2 spool motor valve, 25 gpm

5 spool valve, 20 gpm

Cushion valve for front and rear loaders

1/2 inch NPT swivel

1/2 inch NPT nip

Half inch tee

Pressure relief valve for Power Cube

Spline shaft, male