Polycarbonate Installation: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 8: | Line 8: | ||
=Metal Bending= | =Metal Bending= | ||
*Can use a roofing metal bender to cap polycarbonate. For a 52 long greenhouse. 416 feet are required. | *Can use a roofing metal bender to cap polycarbonate. For a 52 long greenhouse. 416 feet are required. | ||
*6" flashing - $15 for 50' - [http://www.menards.com/main/building-materials/roofing-soffits-gutters/metal-flashing/appleton-supply-6-x-50-steel-roll-valley/p-1351552-c-5810.htm?tid=8407333088927135519] | *6" flashing - $15 for 50' or 30 cents/foot- [http://www.menards.com/main/building-materials/roofing-soffits-gutters/metal-flashing/appleton-supply-6-x-50-steel-roll-valley/p-1351552-c-5810.htm?tid=8407333088927135519] | ||
:*Cut in half is about 15 cents per foot - $60 total cost for capping. | |||
Latest revision as of 03:42, 29 September 2015
Industry Standards
Note - 3 price quotes should be found
- U-profile - $1.3/foot - [1]
- Top sealing aluminum tape = 12 cents/foot - [2]
- Anti-dust bottom tape = 30 cents/foot - [3]
Metal Bending
- Can use a roofing metal bender to cap polycarbonate. For a 52 long greenhouse. 416 feet are required.
- 6" flashing - $15 for 50' or 30 cents/foot- [4]
- Cut in half is about 15 cents per foot - $60 total cost for capping.