Torch Height Controller: Difference between revisions

Latest revision as of 06:23, 12 October 2017

Redirect to:

@@ Line 1: / Line 1: @@
-Based on [[Paul Log]] - here is height controller:
+#redirect [[Oliver Log]]
-Hello Anthony/Marcin,
-Thank you for your order, please confirm you require our Plus Service for "Open Source ecology" as
-your data included solder masking and a top legend, however you requested our Basic Service which does
-not include these options.
-Your two PCB order with out Plus Service as shown in the attached image file is $21.96 US before
-shipping handling and taxes on a three business day turn. We require your confirmation of Service Type
-to proceed with manufacturing.
-Best Regards,
-Support
-Description of attached images :
-   o 271467_1.png : PLUS SERVICE
-We are holding your order until we will receive authorization to
-proceed or we receive your layout modifications.
-Please review the attached JPG(s) and advise us how to proceed.
-Red is Top layer, Blue is Bottom layer, and Green is Drill locations.
-Note: Bright White pad locations indicate plated hole locations.
-When regenerating new data please send a complete zip package containing:
-Gerber files, apertures if necessary, NC drill file, tool list, and an
-order form to support@apcircuits.com referencing your original order number.
-Should you have any additional questions, or require additional data,
-please contact us, at your earliest convenience.
-Thank you.
-AP Circuits
-(403)250-3406
-(403)250-3465 Fax
-support@apcircuits.com
-[[Image:thc.png|500px]]