User:Lex Berezhny/Microfactory: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
(Undo revision 163939 by Lex Berezhny (talk))
 
(15 intermediate revisions by the same user not shown)
Line 2: Line 2:


A factory has inputs and outputs. The decision of which tools and machines comprise the microfactory is a function of the available inputs and the expected outputs, including the requirement of self-replication.
A factory has inputs and outputs. The decision of which tools and machines comprise the microfactory is a function of the available inputs and the expected outputs, including the requirement of self-replication.


=Inputs=
=Inputs=
Line 12: Line 11:
* '''appropriate''': see https://en.wikipedia.org/wiki/Appropriate_technology
* '''appropriate''': see https://en.wikipedia.org/wiki/Appropriate_technology


The following materials have been selected as inputs for the stated criteria:
The following common materials do not match the criteria and require the full [[User:Lex_Berezhny/Factory|Factory]]:
* Steel due to high temperatures involved.
 
The following materials do meet the Microfactory criteria:


==Wood==
==Wood==
Line 18: Line 20:
* wood has been used by humans for thousands of years and can be safely worked with primitive tools
* wood has been used by humans for thousands of years and can be safely worked with primitive tools
* many existing methods, tools and knowledge on working this material
* many existing methods, tools and knowledge on working this material
==Plants==
* hemp / cotton for clothes
* corn for plastics
==Animals==
* food
* wool
* glue from collagen


==Plastic==
==Plastic==
Line 28: Line 39:
* soda cans are everywhere, aluminum scraps are also abundant
* soda cans are everywhere, aluminum scraps are also abundant
* much lower melting temperature than steel, home made foundries for aluminum are popular
* much lower melting temperature than steel, home made foundries for aluminum are popular
* requires access to [User:Lex_Berezhny/Factory] to create steel tools strong enough to manipulate aluminum
* requires access to [[User:Lex_Berezhny/Factory|Factory]] to create steel tools strong enough to manipulate aluminum


==Tin==
* makes lead-free solder for electronics


=Methods=
==Glass==
* glass is found everywhere
* can be worked with limited tools




==aluminum forge to melt aluminum cans and other scrap==
=Methods, Machines & Tools=
 
 
==Aluminum Forge==
* melt aluminum cans and other scrap into ingots
* https://www.youtube.com/watch?v=l2FuvKTyRMQ
* https://www.youtube.com/watch?v=l2FuvKTyRMQ
* https://www.youtube.com/watch?v=y2RYYBRFu1A
* https://www.youtube.com/watch?v=y2RYYBRFu1A
Line 40: Line 59:




==make wire out of ingots==
==Aluminum Extruder==
* https://www.youtube.com/watch?v=owcnaC2ldsg
 
 
==circuit "printer"==
* 3d print board with groves for wire and components
* place aluminum wire into grooves: http://reprap.org/wiki/SpoolHead
* apply solder paste
* pick'n'place components
* melt solder in oven
 
== aluminum extruder==
* heat billets to 900F
* heat billets to 900F
* push through die
* push through die
Line 59: Line 67:
* https://www.youtube.com/watch?v=ch1zEPDcg7E
* https://www.youtube.com/watch?v=ch1zEPDcg7E
* https://www.youtube.com/watch?v=MG3Ls7jrr2o&t=5m53s
* https://www.youtube.com/watch?v=MG3Ls7jrr2o&t=5m53s
* die options:
** steel dies made in [[User:Lex_Berezhny/Factory|Factory]]
** other hard material that can withstand the heat and pressure
==Rolling Mill==
* make wire out of aluminum ingots
* https://www.youtube.com/watch?v=owcnaC2ldsg
* roller options:
** steel rollers forged in [[User:Lex_Berezhny/Factory|Factory]]
** hardened aluminum rollers
** stone or other hard material
==Basic Shop Tools==
===Drill Press===
===Lathe===
==CNC Additive System (3-Axis)==
OSE Universal Axis system with various attachments:
===Hot Filament Extruder===
* Prusa i3 MK3 design
===Circuit Maker===
* 3d print board with groves for wire and leave wholes for components to be placed
* place aluminum wire into grooves: http://reprap.org/wiki/SpoolHead
* A) reflow method:
** apply solder paste (paste extruder head)
** pick'n'place components (suction / gripper head)
** melt solder in oven (manual / robot arm)
* B) solder method:
** pick'n'place components (suction / gripper head)
** solder in place (soldering iron head)
===Laser===
* cutting cardboard
* engraving
==CNC Subtractive System (5-Axis)==
* https://www.youtube.com/watch?v=13872p-UynI
==LCD==
* https://www.youtube.com/watch?v=_zoeeR3geTA
==Glass Blowing==
==Cotton Gin==


==5 axis mill==


=Outputs=
=Outputs=


=Self-Replication=
==Self-Replication==
All of the methods
Using the Microfactory and with some access to a [[User:Lex_Berezhny/Factory|Factory]] or to a marketplace where steel components can be purchased it should be possible to produce another duplicate Microfactory.
=other links=
 
==Electronics==
* laptop, tablet, phone, etc
 
==Robot==
* robot arm for automating small / repetitive tasks
* humanoid robot for helping with all chores on homestead
 
==Clothes==
 
===Sewing Machine===
 
===Washing Machine===
 
===Dryer===
* traditional tumble drying
* automated hang drier
 
===Folding Machine===
* https://www.youtube.com/watch?v=2Uay9hzwusk
 
==Kitchen==
 
===Refrigerator===
 
===Dish Washer===
 
===Toaster w/ Steam cooker for breakfast sandwiches===
* https://www.amazon.com/Back-Basics-TEM500-Muffin-2-Slice/dp/B000B18P96/
 
===Oven===
 
===Range===
 
===Sink / Faucet===
 
===Utensils===
 
===Glassware===
 
==Aluminum Fasteners==
* screws, nuts+bolts, nails
 
 
=Other=
* http://www.metalbot.org/
* http://www.metalbot.org/
* http://www.appropedia.org/Open-source_metal_3-D_printer
* http://www.appropedia.org/Open-source_metal_3-D_printer

Latest revision as of 15:54, 15 January 2018

The microfactory is a set of tools and machines that can be reasonably acquired or built from abundant materials with the goal of enabling humanity to transcend scarcity and poverty.

A factory has inputs and outputs. The decision of which tools and machines comprise the microfactory is a function of the available inputs and the expected outputs, including the requirement of self-replication.

Inputs

Criteria for selecting inputs for the microfactory:

  • abundant: it should be easy to acquire useful amounts of the material for free or at insignificant cost
  • safe: acquiring, handling and processing the material should not be inherently dangerous; common mistakes should be reasonably forgiving
  • appropriate: see https://en.wikipedia.org/wiki/Appropriate_technology

The following common materials do not match the criteria and require the full Factory:

  • Steel due to high temperatures involved.

The following materials do meet the Microfactory criteria:

Wood

  • renewable material that is abundant and free if harvested from your own property
  • wood has been used by humans for thousands of years and can be safely worked with primitive tools
  • many existing methods, tools and knowledge on working this material

Plants

  • hemp / cotton for clothes
  • corn for plastics

Animals

  • food
  • wool
  • glue from collagen

Plastic

  • PET soda bottles and HDPE milk jugs are everywhere
  • used for storing food, is expected to be safe
  • it's only in the last decade that this material has become appropriate for a home based microfactory. methods, tools and knowledge is still at early stages

Aluminum

  • soda cans are everywhere, aluminum scraps are also abundant
  • much lower melting temperature than steel, home made foundries for aluminum are popular
  • requires access to Factory to create steel tools strong enough to manipulate aluminum

Tin

  • makes lead-free solder for electronics

Glass

  • glass is found everywhere
  • can be worked with limited tools


Methods, Machines & Tools

Aluminum Forge


Aluminum Extruder


Rolling Mill

Basic Shop Tools

Drill Press

Lathe

CNC Additive System (3-Axis)

OSE Universal Axis system with various attachments:

Hot Filament Extruder

  • Prusa i3 MK3 design

Circuit Maker

  • 3d print board with groves for wire and leave wholes for components to be placed
  • place aluminum wire into grooves: http://reprap.org/wiki/SpoolHead
  • A) reflow method:
    • apply solder paste (paste extruder head)
    • pick'n'place components (suction / gripper head)
    • melt solder in oven (manual / robot arm)
  • B) solder method:
    • pick'n'place components (suction / gripper head)
    • solder in place (soldering iron head)

Laser

  • cutting cardboard
  • engraving


CNC Subtractive System (5-Axis)


LCD


Glass Blowing

Cotton Gin

Outputs

Self-Replication

Using the Microfactory and with some access to a Factory or to a marketplace where steel components can be purchased it should be possible to produce another duplicate Microfactory.

Electronics

  • laptop, tablet, phone, etc

Robot

  • robot arm for automating small / repetitive tasks
  • humanoid robot for helping with all chores on homestead

Clothes

Sewing Machine

Washing Machine

Dryer

  • traditional tumble drying
  • automated hang drier

Folding Machine

Kitchen

Refrigerator

Dish Washer

Toaster w/ Steam cooker for breakfast sandwiches

Oven

Range

Sink / Faucet

Utensils

Glassware

Aluminum Fasteners

  • screws, nuts+bolts, nails


Other

Retrieved from "https://wiki.opensourceecology.org/index.php?title=User:Lex_Berezhny/Microfactory&oldid=163940"