D3D Ohio 18.02 Design Specification: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
(One intermediate revision by the same user not shown) | |||
Line 2: | Line 2: | ||
=Reason for this Iteration and what this Iteration addresses= | =Reason for this Iteration and what this Iteration addresses= | ||
* | *The MK8 extruder has had too much variation and has caused issues when replicating. There is no standard mk8, varioud gear sizes and quality issues have been seen, so the team will be used a adapted version of the Prusa I3 MK 2 extruder here. http://opensourceecology.org/wiki/File:Prusa_i3_mk2_extruder_adapted.fcstd | ||
* | *This iteration is experimenting with PVC frames for a large build volume. A frame using 3/4" pvc was previously made that had an 8" bed, we are going to see how far we can take this concept for the huge benefit of the availability of PVC | ||
=Development Template Links= | =Development Template Links= | ||
Line 11: | Line 12: | ||
[[D3D_Ohio_v18.02]] | [[D3D_Ohio_v18.02]] | ||
=Requirements of this Iteration= | |||
*12" print bed | |||
*Uses Mk2 adopted extruder with 8mm leveling head http://opensourceecology.org/wiki/File:Prusa_i3_mk2_extruder_adapted.fcstd | |||
*explores using PVC as a design material | |||
=Design rational= | |||
We will start with a 1" PVC tubed frame, and will also have on hand parts for a two motor Z axis (previously just a one motor overhang) | |||
=Pictures= | =Pictures= | ||
=CAD file history= |
Latest revision as of 21:36, 2 March 2018
Reason for this Iteration and what this Iteration addresses
- The MK8 extruder has had too much variation and has caused issues when replicating. There is no standard mk8, varioud gear sizes and quality issues have been seen, so the team will be used a adapted version of the Prusa I3 MK 2 extruder here. http://opensourceecology.org/wiki/File:Prusa_i3_mk2_extruder_adapted.fcstd
- This iteration is experimenting with PVC frames for a large build volume. A frame using 3/4" pvc was previously made that had an 8" bed, we are going to see how far we can take this concept for the huge benefit of the availability of PVC
Development Template Links
A development template holds key project management and closeout items such as the burndown chart, bom and other information such as the development log
Requirements of this Iteration
- 12" print bed
- Uses Mk2 adopted extruder with 8mm leveling head http://opensourceecology.org/wiki/File:Prusa_i3_mk2_extruder_adapted.fcstd
- explores using PVC as a design material
Design rational
We will start with a 1" PVC tubed frame, and will also have on hand parts for a two motor Z axis (previously just a one motor overhang)