Aquaponic Greenhouse Design Guide: Difference between revisions
No edit summary |
No edit summary |
||
| Line 7: | Line 7: | ||
-Round fish tanks, made of fiberglass or polyethelene. | -Round fish tanks, made of fiberglass or polyethelene. | ||
-Diameter 10 ft, height 4 ft, water volume 2060 gal. | -Diameter 10 ft, height 4 ft, water volume 2060 gal. | ||
-Turnover rate of water: For fish stocking density 15 kg/m3, at least half of fish tank water volume. | -Turnover rate of water: For fish stocking density 15 kg/m3, at least half of fish tank water volume. For higher fish stocking density, at least one fish tank water volume. | ||
- Tangential flow of water entering the tank and bottom center outlet for water exiting the tank. | - Tangential flow of water entering the tank and bottom center outlet for water exiting the tank. | ||
Latest revision as of 06:04, 27 March 2018
Introduction: (Page started as of 3/13/2018, work in progress.)
Structural components:
Fish rearing tank: -Round fish tanks, made of fiberglass or polyethelene. -Diameter 10 ft, height 4 ft, water volume 2060 gal. -Turnover rate of water: For fish stocking density 15 kg/m3, at least half of fish tank water volume. For higher fish stocking density, at least one fish tank water volume. - Tangential flow of water entering the tank and bottom center outlet for water exiting the tank.
FreeCAD link of the individual components and entire system design:
Systems involved and inter-dependancy of systems:
Key considerations:
Aquaponics production details and business model:
Refer: http://www.aquaponic.com.au/fact%20sheets.htm http://aquaculture.ca.uky.edu/sites/aquaculture.ca.uky.edu/files/srac_454_recirculating_aquaculture_tank_production_systems_-_aquaponics_-_integrating_fish_and_plant_culture_0.pdf file:///home/bk-ose/Downloads/SRAC_0453.pdf