Ironworker Concept: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
(Created page with "*120 ton for up to 1.5" holes in 1" metal *Can be based on the existing Holepuncher Prototype I design *Shear for 8-12" of 1" steel *Angle cutter for up to 6x6 angle *DIY she...")
 
(Replaced content with "{{delete}}")
 
(One intermediate revision by one other user not shown)
Line 1: Line 1:
*120 ton for up to 1.5" holes in 1" metal
{{delete}}
*Can be based on the existing [[Holepuncher Prototype I]] design
*Shear for 8-12" of 1" steel
*Angle cutter for up to 6x6 angle
*DIY shear blade - made from hardening of mild steel, at $40 in materials
*May involve [[Induction Furnace]] for hardening
 
[[Category:Design Rationale]]

Latest revision as of 03:21, 23 August 2011

This page was tagged as a candidate for deletion. If this page does not meet our criteria for deletion, please remove this notice.

'

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Ironworker_Concept&oldid=36934"