Latest revision as of 11:05, 28 March 2021

Notes

Drawn using OpenSCAD, Sprocket Generator and considering File:ShaftSprocketCoupler.fcstd. OpenSCAD code (dimensions in mm):

   sprocket(7,19.05,31.75,17.58,0);

Note also that the OD is 3.35". Using the sprocket generator it's not possible to draw it with the correct OD

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Dimensions	User	Comment
current	11:03, 28 March 2021	(103 KB)	Calligarov (talk \| contribs)	Redrawn to have a bore usable for assemblies
	16:11, 27 March 2021	(63 KB)	Calligarov (talk \| contribs)

You cannot overwrite this file.

The following page uses this file:

@@ Line 1: / Line 1: @@
 =Notes=
-Drawn using OpenSCAD, [[Sprocket Generator]] and considering [[File:ShaftSprocketCoupler.fcstd]]. OpenSCAD code:
+Drawn using OpenSCAD, [[Sprocket Generator]] and considering [[File:ShaftSprocketCoupler.fcstd]]. OpenSCAD code (dimensions in mm):
- difference(){
      sprocket(7,19.05,31.75,17.58,0);
-    cylinder(r=25.4,h=17.58);
- }
 Note also that the OD is 3.35". Using the sprocket generator it's not possible to draw it with the correct OD
 =For BOM=
 https://www.usarollerchain.com/100A7-Sprocket-A-Plate-100A7-Sprocket-p/100a7-sprocket.htm