Latest revision as of 04:46, 31 May 2023

Notes

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Dimensions	User	Comment
current	04:46, 31 May 2023	(206 KB)	Marcin (talk \| contribs)	Added sketch for roof layout of blocking, and blocking sketches on one panel.
	04:02, 31 May 2023	(205 KB)	Marcin (talk \| contribs)	Simplified mounting to 2x6s, and 10" long for back and 5.5" for front. 10 degree angle slit, 1" down. Back goes straight up - easy to measure 38".
	21:21, 30 May 2023	(84 KB)	Marcin (talk \| contribs)	Front mount. Using a flat block with angled slit. Has tech drawing. Use 5.25" length of 2x4 treated lumber for optimal 2x4 material use in 27 panel system.
	21:14, 30 May 2023	(83 KB)	Marcin (talk \| contribs)	Front mount. Using a flat block with angled slit. Has tech drawing. Use 5.25" length of 2x4 treated lumber for optimal 2x4 material use in 27 panel system.
	20:44, 30 May 2023	(74 KB)	Marcin (talk \| contribs)	Updated for 2x4 treated lumber mount
	06:29, 30 May 2023	(202 KB)	Marcin (talk \| contribs)	Tech drawing added
	17:02, 31 January 2023	(158 KB)	Marcin (talk \| contribs)	Single panel with straddle plank.
	02:55, 31 January 2023	(149 KB)	Marcin (talk \| contribs)	Front and back mounts mirrored correctly. Ready to prototype with 10" and 4" block lengths.
	02:36, 31 January 2023	(123 KB)	Marcin (talk \| contribs)	Mirrored the bottom hurricane tie to make it universal (not right- or left-hand sided)
	02:17, 31 January 2023	(119 KB)	Marcin (talk \| contribs)	Fixed length of hurricane tie from 7" to 6.5" (Mitek Zmax)

You cannot overwrite this file.

The following page uses this file:

@@ Line 1: / Line 1: @@
+=Notes=
+*Use tech drawing in 15:44, 30 May 2023 for back mount.
+*USe