Pellet Fuel Recipes: Difference between revisions
Jump to navigation
Jump to search
(Created Page + Added Basic Sections/Info) |
(Added some more information) |
||
| (5 intermediate revisions by the same user not shown) | |||
| Line 6: | Line 6: | ||
**[[Pelletized RDF]] | **[[Pelletized RDF]] | ||
**Charred or [[Torrefied]] versions of these | **Charred or [[Torrefied]] versions of these | ||
*The attention will mainly be on Additives, Beneficial Blending, and [[Moisture Content]] | *The attention will mainly be on Additives, Beneficial Blending, and [[Moisture Content]] recommendations | ||
*The Additives mentioned can probably be of use for [[Paper Logs]] / [[Briquettes]] and [[Molded Pulp]] | |||
=Additives= | |||
*[[Lignin]] | |||
**If not burned at the [[Paper Mill]] or [[Biorefinery]] for energy, it cam be diverted to uses such as this | |||
**Bio-[[Thermoplastic]] which as per [https://pubs.rsc.org/en/content/articlehtml/2019/ra/c9ra07052d#:~:text=The%20lignin%20melts%20fully%20at,%C2%B0C%20for%208%20hours. this paper] The lignin melts fully at 147 °C and flows at 163 °C (Fisher Scientific melting point tester) | |||
*[[Starch]] | |||
*[[Lignosulfonate]] | |||
**This wouldn’t be ideal for fuel use however due to [[Sulfur Dioxide]] etc emissions | |||
**Could look into if at low blend percentages it wouldn’t cause too much of a problem, and a simple Water Based [[Wet Scrubber]] ‘’’WOULD’’’ work, but it’s probably best to simply avoid altogether | |||
*[[Urea-Formaldehyde Condensation Polymer]] ( [[UFCP]] ) | |||
**Need to double check if this is [[Biodegradable]] , as with [[Nylon-4]] it may be a novel version of an existing plastic family that IS biodegradable | |||
=Internal Link= | =Internal Link= | ||
Latest revision as of 15:10, 3 October 2024
Basics
- This Page aims to go over recipes for various pellet fuels
- MAINLY:
- Wood Pellets
- Pelletized Biomass (Non-Wood)
- Pelletized RDF
- Charred or Torrefied versions of these
- The attention will mainly be on Additives, Beneficial Blending, and Moisture Content recommendations
- The Additives mentioned can probably be of use for Paper Logs / Briquettes and Molded Pulp
Additives
- Lignin
- If not burned at the Paper Mill or Biorefinery for energy, it cam be diverted to uses such as this
- Bio-Thermoplastic which as per this paper The lignin melts fully at 147 °C and flows at 163 °C (Fisher Scientific melting point tester)
- Starch
- Lignosulfonate
- This wouldn’t be ideal for fuel use however due to Sulfur Dioxide etc emissions
- Could look into if at low blend percentages it wouldn’t cause too much of a problem, and a simple Water Based Wet Scrubber ‘’’WOULD’’’ work, but it’s probably best to simply avoid altogether
- Urea-Formaldehyde Condensation Polymer ( UFCP )
- Need to double check if this is Biodegradable , as with Nylon-4 it may be a novel version of an existing plastic family that IS biodegradable