Propane Safety: Difference between revisions
		
		
		
		
		
		Jump to navigation
		Jump to search
		
				
		
		
	
 (Created Page + Added Basic Sections/Info)  | 
				 (Added some more information)  | 
				||
| (7 intermediate revisions by the same user not shown) | |||
| Line 3: | Line 3: | ||
*A dedicated pave may be required eventually, but much of the precautions are the same for [[Butane]] and [[LPG]]  | *A dedicated pave may be required eventually, but much of the precautions are the same for [[Butane]] and [[LPG]]  | ||
*[[DME]] ,  [[Hydrogen]] , and [[CNG]] are somewhat similar, but have different properties which have unique concerns associated with them  | *[[DME]] ,  [[Hydrogen]] , and [[CNG]] are somewhat similar, but have different properties which have unique concerns associated with them  | ||
=Areas of Concern=  | |||
==Specific Devices==  | |||
===Storage Tanks===  | |||
*Only buying and using reputable tanks   | |||
*Inspecting Tanks for Rust+Leaks Over Time  | |||
*Transporting Tanks in a DOT Approved Manner etc  | |||
===Propane Appliances===  | |||
*Using them as per the directions  | |||
*Maintaining Them + Checking for Leaks+Corrosion  | |||
*Check Manufacturers’ Instructions, but probably “bleed the lines” when not in use / storing them  | |||
===Propane Vehicles/Forklifts===  | |||
*Check For Leaks + Corrosion  | |||
*When not in use (at least in “lower tech” implementations such as a Forklift, may be irrelevant for a high quality [[Autogas]] vehicle etc) close the valves on the tank fully and run the engine until it no longer runs due to lack of fuel  | |||
**This is similar to “Running a Carburetor Dry” / “Draining a Carburetor”, but for the Propane Line  | |||
***Due to how Propane Vapor Cools, making sure there is no chance of any of that leaking out+pooling+igniting is best practice for safety  | |||
****Albeit a BIT overkill, but better to not take the chance and all it takes is a few moments   | |||
==Facility/Building Design==  | |||
===Propane Tank Storage===  | |||
*While it is not GREAT or Legally Advisable, Properly Stored Tanks that are sealed tight and in good conduit CAN sit in a (Well Ventilated) [[Garage]] etc until the next time a grill is used etc  | |||
*The more advisable way, and legally required way for commercial installations, is to store the tanks Outside in a [[Propane Tank Cage]]  | |||
**Need to see if [[Flammable Storage Cabinets]] are legally compliant, ventillation may be a bit more of a concern  | |||
===Building Offsets===  | |||
*Large Propane Storage Tanks must be offset from the Building, and from Ignition Sources such as [[HVAC Units]] (electrical wiring + motors etc)  | |||
*Ideally and probably as per code, they should also be fenced off and/or be out of the way of people messing with them etc  | |||
*[[Bolards]] and other means of preventing Vehicle Crashes into them are also advisable and/or required by code  | |||
*[[Underground Storage Tanks]] have more issues from a [[Design for Cleaning]] perspective, BUT for Gaseous Fuels such as Propane, they MAY make more sense, and offer more safety in the event of a leak or explosion (Citation needed, BUT it already is below floor level in terms of leaks, and is buried/surrounded by an Earth [[Berm]] already)  | |||
===Detection Systems===  | |||
*[[Propane Detectors]] (or more broad “Hydrocarbon Detectors” ), or combined [[Propane+Carbon Monoxide Detectors]] are available Off the Shelf, and are an advisable addition to [[Smoke Detectors]]  | |||
*To an extent regularly checking for Volume Loss, and a simple “Look, Listen, Smell” Jobsite/Tank Farm Walkaround goes a long way too  | |||
=== [[HAZCOM]] ===  | |||
*[[Propane Placards]] and other ways to communicate WHAT is being stored, and how that can impact someone (Mainly Fires/Explosions, or Freeze Injuries, as well as [[Asphyxiation Hazards]] to an extent) are a cheap addition and well worth it  | |||
*Given protecting worker’s / emergency responder’s safety is always top priority, having it well communicated where these hazards are makes the job easier for those people if/when relevant as well  | |||
=Internal Links=  | =Internal Links=  | ||
*  | *[[Propane]]  | ||
=External Links=  | =External Links=  | ||
*  | *[https://propane.com/safety/ THE Propane . com Website Page on Safety]  | ||
**Has a good booklet/presentation, albeit may not be Public Domain  | |||
*[https://www.propane101.com/propanetankdistancerules.htm Propane 101 - Propane Tank Distance Requirements]  | |||
**Cites [[NFPA]]  | |||
*[https://www.amerigas.com/propane-grill-tanks/transporting-propane-tanks A Page by Amerigas Titled “ Transporting Propane Tanks - Know how to safely get your propane cylinder from the retailer, to your home, to your next adventure.]  | |||
*[https://www.placer.ca.gov/DocumentCenter/View/3291/Liquid-Propane-Gas-Tank-Installation-Below-5000-Foot-Elevation-PDF A Placer County California Code Guide Titled “Liquid Propane Gas Tank Installation Below 5,000 Ft Elevation” ]  | |||
**Found it via google recommending [https://activerain.com/blogsview/3353055/proper-placement-of-liquid-petroleum-propane-tanks this home inspection blogpost] using it  | |||
*[https://www.reddit.com/r/homeowners/comments/1fowe0g/small_propane_gas_can_storage/ A Reddit Post on r/Honeowners Titled “ Small propane / gas can storage?” ]  | |||
**Granted Reddit isn’t GREAT with being For-Profit + The Moderation Controversy etc, BUT figured it was worth including for a sort of gauge of community thought+input  | |||
[[Category: Safety]]  | [[Category: Safety]]  | ||
Latest revision as of 22:27, 18 September 2025
Basics
- This page aims to go over the ways to safely Store + Use Propane
 - A dedicated pave may be required eventually, but much of the precautions are the same for Butane and LPG
 - DME , Hydrogen , and CNG are somewhat similar, but have different properties which have unique concerns associated with them
 
Areas of Concern
Specific Devices
Storage Tanks
- Only buying and using reputable tanks
 - Inspecting Tanks for Rust+Leaks Over Time
 - Transporting Tanks in a DOT Approved Manner etc
 
Propane Appliances
- Using them as per the directions
 - Maintaining Them + Checking for Leaks+Corrosion
 - Check Manufacturers’ Instructions, but probably “bleed the lines” when not in use / storing them
 
Propane Vehicles/Forklifts
- Check For Leaks + Corrosion
 - When not in use (at least in “lower tech” implementations such as a Forklift, may be irrelevant for a high quality Autogas vehicle etc) close the valves on the tank fully and run the engine until it no longer runs due to lack of fuel
- This is similar to “Running a Carburetor Dry” / “Draining a Carburetor”, but for the Propane Line
- Due to how Propane Vapor Cools, making sure there is no chance of any of that leaking out+pooling+igniting is best practice for safety
- Albeit a BIT overkill, but better to not take the chance and all it takes is a few moments
 
 
 - Due to how Propane Vapor Cools, making sure there is no chance of any of that leaking out+pooling+igniting is best practice for safety
 
 - This is similar to “Running a Carburetor Dry” / “Draining a Carburetor”, but for the Propane Line
 
Facility/Building Design
Propane Tank Storage
- While it is not GREAT or Legally Advisable, Properly Stored Tanks that are sealed tight and in good conduit CAN sit in a (Well Ventilated) Garage etc until the next time a grill is used etc
 - The more advisable way, and legally required way for commercial installations, is to store the tanks Outside in a Propane Tank Cage
- Need to see if Flammable Storage Cabinets are legally compliant, ventillation may be a bit more of a concern
 
 
Building Offsets
- Large Propane Storage Tanks must be offset from the Building, and from Ignition Sources such as HVAC Units (electrical wiring + motors etc)
 - Ideally and probably as per code, they should also be fenced off and/or be out of the way of people messing with them etc
 - Bolards and other means of preventing Vehicle Crashes into them are also advisable and/or required by code
 - Underground Storage Tanks have more issues from a Design for Cleaning perspective, BUT for Gaseous Fuels such as Propane, they MAY make more sense, and offer more safety in the event of a leak or explosion (Citation needed, BUT it already is below floor level in terms of leaks, and is buried/surrounded by an Earth Berm already)
 
Detection Systems
- Propane Detectors (or more broad “Hydrocarbon Detectors” ), or combined Propane+Carbon Monoxide Detectors are available Off the Shelf, and are an advisable addition to Smoke Detectors
 - To an extent regularly checking for Volume Loss, and a simple “Look, Listen, Smell” Jobsite/Tank Farm Walkaround goes a long way too
 
HAZCOM
- Propane Placards and other ways to communicate WHAT is being stored, and how that can impact someone (Mainly Fires/Explosions, or Freeze Injuries, as well as Asphyxiation Hazards to an extent) are a cheap addition and well worth it
 - Given protecting worker’s / emergency responder’s safety is always top priority, having it well communicated where these hazards are makes the job easier for those people if/when relevant as well
 
Internal Links
External Links
- THE Propane . com Website Page on Safety
- Has a good booklet/presentation, albeit may not be Public Domain
 
 
- Propane 101 - Propane Tank Distance Requirements
- Cites NFPA
 
 - A Page by Amerigas Titled “ Transporting Propane Tanks - Know how to safely get your propane cylinder from the retailer, to your home, to your next adventure.
 - A Placer County California Code Guide Titled “Liquid Propane Gas Tank Installation Below 5,000 Ft Elevation” 
- Found it via google recommending this home inspection blogpost using it
 
 - A Reddit Post on r/Honeowners Titled “ Small propane / gas can storage?” 
- Granted Reddit isn’t GREAT with being For-Profit + The Moderation Controversy etc, BUT figured it was worth including for a sort of gauge of community thought+input