CEB Press/Manufacturing Instructions/Grate mounts: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
No edit summary
 
(15 intermediate revisions by 2 users not shown)
Line 1: Line 1:
{{Template:CEB Press Manufacturing Instructions Navbox}}
[[Image:grate-mounts.jpg|thumb| Grate mounts.]]
{{Warning|The documentation for the CEB Press is undergoing a thorough overhaul. CAD models and written directions are presently obsolete.  For more information, see [[Talk:CEB_Press#Documentation_overhaul_in_progress]]. When the models, specifications and text on this article have been thoroughly reviewed, updated when necessary, and confirmed as whole and accurate, this warning may be removed.}}
 
<html><iframe src="http://sketchup.google.com/3dwarehouse/mini?mid=692395798fa885f71211da1f85706ccd&etyp=sw&width=400&height=300" frameborder="0" scrolling="no" marginheight="0" marginwidth="0" width="400" height="300"></iframe>
</html>
 
=Part Information=
 
The grate mounts attach to the primary arms and to a nut welded to the grate.
 
=Tools=


[[Image:grate-mounts.jpg|thumb| Grate mounts.]]
The grate mounts attach to the primary arms and to a nut welded to the grate.
== Tools Required ==
*Torch
*Torch
*Punch with 13/16" Dies
*Punch with 13/16" Dies


== Materials Required ==
*Grinder
*4"x4"x1/2" angle: 36" (2)
 
=Materials=
 
*[2] Steel Angle 4" A x 4" B x 1/2" Thickness x 38" Length
 
=Steps=
 
*Punch a 13/16" hole at the bottom of the supports for each.
 
[[Image:Gratehole.png|600px]]


== Diagrams ==
*Torch away a 4" section on the top of each grate to make it like the model shown. Remember that the two are mirrored. Cut away the corner so the hopper wont hit it, about a 1" 45 degree triangle.
{{Wanted|Better diagrams, showing where hole placement is}}
[[Image:gratemountsskup.jpg|thumb|200px|The grate mounts.]]


[[Image:Gratemount.png|600px]]


*Torch a slot for a 3/4" bolt at the top of the mount, as shown.


== Fabrication Steps ==
*Grind away all the slag.
#Punch the hole on the bottom of the supports for each. This should be 1" up and centered on the proper side.
#Torch away a 4" section on the top of each grate to make it like the model shown. Remember that the two are mirrored. Cut away the corner so the hopper wont hit it, about a 1" 45 degree triangle.
#Torch a slot for a 3/4" bolt at the top of the mount, centered, on the long side. The top of this should be 3/4" away from the top of the angle, and it should be at least 1.5" long.
#Grind away all the slag.

Latest revision as of 01:07, 23 December 2011

Grate mounts.

Part Information

The grate mounts attach to the primary arms and to a nut welded to the grate.

Tools

  • Torch
  • Punch with 13/16" Dies
  • Grinder

Materials

  • [2] Steel Angle 4" A x 4" B x 1/2" Thickness x 38" Length

Steps

  • Punch a 13/16" hole at the bottom of the supports for each.

Gratehole.png

  • Torch away a 4" section on the top of each grate to make it like the model shown. Remember that the two are mirrored. Cut away the corner so the hopper wont hit it, about a 1" 45 degree triangle.

Gratemount.png

  • Torch a slot for a 3/4" bolt at the top of the mount, as shown.
  • Grind away all the slag.
Retrieved from "https://wiki.opensourceecology.org/index.php?title=CEB_Press/Manufacturing_Instructions/Grate_mounts&oldid=49140"