PowerCube Tools: Difference between revisions
Jump to navigation
Jump to search
Tom Griffing (talk | contribs) (→Tools) |
No edit summary |
||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
===Tools=== | ===Tools=== | ||
*Welder - OSE uses Millermatic 200 series welders | *Welder - OSE uses Millermatic 200 series welders, I use a Hobart IronMan | ||
*Angle Grinders - A 4" grinder is good for small grinds and tight spots and a 7" grinder is good for grinding larger areas | *Angle Grinders - A 4" grinder is good for small grinds and tight spots and a 7" grinder is good for grinding larger areas | ||
*Hand Tools | *Hand Tools | ||
**Vise Grip pliers - handy for clamping and manipulating steel (very handy with hot steel) | |||
**Crescent wrench - Useful for handling hot steel and tightening bolts | **Crescent wrench - Useful for handling hot steel and tightening bolts | ||
**Socket set - Faster tightening of bolts | **Socket set - Faster tightening of bolts | ||
**Hammer - Very useful in many instances | **Hammer - Very useful in many instances | ||
**Barrel Crimper (for engine connector) | |||
**Spade crimper (for other connectors) | |||
*Metal Cutting Tools | *Metal Cutting Tools | ||
**Bandsaw - must be metal cutting band saw | **Bandsaw - must be metal cutting band saw with ability to cut 45 degree angles | ||
** | **Cutting Torch - makes rough cuts | ||
*Paint Tools | *Paint Tools | ||
**Paint Brush | |||
- or - | |||
**Gravity Fed Paint Sprayer | **Gravity Fed Paint Sprayer | ||
**Air compressor - If using pneumatic tools | **Air compressor - If using pneumatic tools | ||
[[category:Power Cube]] | |||
Latest revision as of 22:50, 27 December 2013
Tools
- Welder - OSE uses Millermatic 200 series welders, I use a Hobart IronMan
- Angle Grinders - A 4" grinder is good for small grinds and tight spots and a 7" grinder is good for grinding larger areas
- Hand Tools
- Vise Grip pliers - handy for clamping and manipulating steel (very handy with hot steel)
- Crescent wrench - Useful for handling hot steel and tightening bolts
- Socket set - Faster tightening of bolts
- Hammer - Very useful in many instances
- Barrel Crimper (for engine connector)
- Spade crimper (for other connectors)
- Metal Cutting Tools
- Bandsaw - must be metal cutting band saw with ability to cut 45 degree angles
- Cutting Torch - makes rough cuts
- Paint Tools
- Paint Brush
- or -
- Gravity Fed Paint Sprayer
- Air compressor - If using pneumatic tools