CEB Press/Manufacturing Instructions/Arms - secondary: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
No edit summary
No edit summary
 
(One intermediate revision by one other user not shown)
Line 1: Line 1:
{{Category=CEB press building instructions}}
{{Category=CEB press building instructions}}
{{Template:CEB Press Manufacturing Instructions Navbox}}


[[Image:Secondaryarms.jpg|400px]]
[[Image:Secondaryarms.jpg|400px]]
The secondary arms connect the primary arm/frame assembly to the legs to support the structure.


== Tools Required ==
<html>
<iframe src="http://sketchup.google.com/3dwarehouse/mini?mid=4c317c20fdb7bac61211da1f85706ccd&etyp=sw&width=400&height=300" frameborder="0" scrolling="no" marginheight="0" marginwidth="0" width="400" height="300"></iframe>
</html><br/>
 
[[Image:2ndarmweldover.png|800px]]
 
=Part Information=
 
The secondary arms connect the primary arms to the legs to support the structure.
 
=Tools Required=


*Cutting Torch
*Cutting Torch
*Angle Grinder
*Angle Grinder
*Welder
*Welder


== Materials Required ==
=Materials Required=


*2 pieces 72" long - 4"x6"x1/2" angle steel
*[2] Steel Angle 4" A x 6" B x 1/2" Thickness x 72" Length
*1 piece 3"x3"x1/2" steel
*[[CEB Press/Manufacturing Instructions/Leg Holders|Leg Holders]](8)


== Diagrams ==
*Steel Plate 3" x 3" x 1/2"
<html>
 
<iframe src="http://sketchup.google.com/3dwarehouse/mini?mid=4c317c20fdb7bac61211da1f85706ccd&etyp=sw&width=400&height=300" frameborder="0" scrolling="no" marginheight="0" marginwidth="0" width="400" height="300"></iframe>
*[8] Leg Holders
</html><br/>
[[Image:2ndarmweldover.png|800px]]


== Fabrication Steps ==
== Fabrication Steps ==
#Punch the holes in each arm. They are symmetrical
 
#Place the leg holders in their proper locations.
*Punch the holes in each arm. They are symmetrical.
#*They go on the 4" side of the angle.
 
#*They are symmetric. See Diagram for placement on each end.
*Place the leg holders in their proper locations.
#Make sure they are square with the angle iron and centered vertically.
 
#*Weld them to the machine.
*They go on the 4" side of the angle.
#*You may want to weld them so the nut is facing sideways instead of straight out, this way the bolts don't stick out any more from the machine. (They like to catch your clothing as you walk by)
 
*They are symmetric. See Diagram for placement on each end.
 
*Make sure they are square with the angle iron and centered vertically.
 
*Weld them to the angle.

Latest revision as of 00:59, 23 December 2011

Main > Housing and construction > CEB Press > CEB press building instructions

Secondaryarms.jpg


2ndarmweldover.png

Part Information

The secondary arms connect the primary arms to the legs to support the structure.

Tools Required

  • Cutting Torch
  • Angle Grinder
  • Welder

Materials Required

  • [2] Steel Angle 4" A x 6" B x 1/2" Thickness x 72" Length
  • Steel Plate 3" x 3" x 1/2"
  • [8] Leg Holders

Fabrication Steps

  • Punch the holes in each arm. They are symmetrical.
  • Place the leg holders in their proper locations.
  • They go on the 4" side of the angle.
  • They are symmetric. See Diagram for placement on each end.
  • Make sure they are square with the angle iron and centered vertically.
  • Weld them to the angle.
Retrieved from "https://wiki.opensourceecology.org/index.php?title=CEB_Press/Manufacturing_Instructions/Arms_-_secondary&oldid=49138"