Torch Table Design Rationale: Difference between revisions
Jump to navigation
Jump to search
Marie.Byleen (talk | contribs) mNo edit summary |
|||
| (3 intermediate revisions by one other user not shown) | |||
| Line 1: | Line 1: | ||
{{Template:Category=Torch Table}} | |||
See [[Torch Table]] for development work. | See [[Torch Table]] for development work. | ||
| Line 10: | Line 12: | ||
*495 in oz [[Stepper Motors]] from xylotex, 1/4" shafts | *495 in oz [[Stepper Motors]] from xylotex, 1/4" shafts | ||
**About 31 in lb torque, or 1 G acceleration for a 60 pound gantry with 1" diameter driver gear | **About 31 in lb torque, or 1 G acceleration for a 60 pound gantry with 1" diameter driver gear | ||
*Gantry weight - | *Gantry weight - about 90 lb, see below | ||
[[Image:annotatedtable.jpg]] | [[Image:annotatedtable.jpg]] | ||
| Line 37: | Line 39: | ||
| 4 | | 4 | ||
|---- | |---- | ||
|3/16 plate, 15 4x1/16 tubing | |3/16 plate, 15 4x1/16 tubing | ||
| 7 | | 7 | ||
|---- | |---- | ||
| Line 50: | Line 52: | ||
|---- | |---- | ||
|'''TOTAL''' | |'''TOTAL''' | ||
| '''85''' | | '''85 lb''' | ||
|---- | |---- | ||
|} | |} | ||
For this weight, acceleratio of motors is about 2/3 G | |||
[[Image:gantryannot3d.jpg]] | [[Image:gantryannot3d.jpg]] | ||
Latest revision as of 15:38, 21 January 2011
Main > Digital Fabrication > RepLab Tools > Torch Table
See Torch Table for development work.
Basic Design
- 6" wide by 1/4" u-channel frame
- Gear rack drive, 20 degree gear rack, 1/2" wide, 20 pitch (20 teeth per inch)
- 1" pinion gear, rides directly on rack
- z-axis of torch has manual adjustment
- Sacrificial slats may be used, or another workpiece table
- 495 in oz Stepper Motors from xylotex, 1/4" shafts
- About 31 in lb torque, or 1 G acceleration for a 60 pound gantry with 1" diameter driver gear
- Gantry weight - about 90 lb, see below
X Axis Detail
Gantry detail
Gantry weight:
| ITEM | WEIGHT (LB) |
| stepper motor x 2 | 8 |
| 6x1/4x6' y track plate | 30 |
| torch head | 4 |
| 3/16 plate, 15 4x1/16 tubing | 7 |
| Delta support | 5 |
| 2x2" angle verticals | 7 |
| z axis cage | 7 |
| TOTAL | 85 lb |
For this weight, acceleratio of motors is about 2/3 G
