Cold Saw/V1 Design Files: Difference between revisions

From Open Source Ecology
Jump to navigation Jump to search
 
(27 intermediate revisions by the same user not shown)
Line 1: Line 1:
=Uniform Mounting Dimensions=
*'''Base Plate to Base Flat: 80mm x 520mm'''
*'''Base Flat to Vise: 50mm x 90mm'''
*'''Vise Rod to Rod: 95mm'''
*'''Support Flat to Interface Flat: 75mm x 80mm'''
*'''Hydraulic Motor to Interface Flat: 40mm x 100mm'''
*'''Blade Guard to Interface Flat: 80mm x 100mm'''
=Uniform Fasteners=
=Uniform Fasteners=
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Blade_Guard_Nut Small Nut]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Blade_Guard_Bolt Short Bolt]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Blade_Guard_Bolt Short Bolt]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Long_Screw Long Screw]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Long_Screw Long Screw]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Long2_Screw Long2 Screw]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Coupling_Setscrew Short Setscrew]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Coupling_Setscrew Short Setscrew]
Line 12: Line 26:


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Threaded_Rod Threaded Rod]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Threaded_Rod Threaded Rod]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Short_Threaded_Rod Short Threaded Rod]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Blade_Guard_Nut Small Nut]


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Large_Nut Large Nut]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Large_Nut Large Nut]
=Uniform Spacers=
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Short_Spacer Short Spacer]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Long_Spacer Long Spacer]


=Uniform Shafts=
=Uniform Shafts=
Line 40: Line 64:


[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Pin_Collar Small Shaft Collar]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Pin_Collar Small Shaft Collar]
=Base System=
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Baseplate Baseplate]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Base_Disc Base Disc]
=Vise System=
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Fixed_Block Fixed Block]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Moving_Block Moving Block]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Vise_Jaw Vise Jaw]
=Swivel System=
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Shaft_Block Shaft Block]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Swivel_Plate Swivel Plate]
=Support System=
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Support_Bar Support Bar]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Bridge_Bar Bridge Bar]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Interface_Plate Interface Plate]
=Drive System=
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Hydraulic_Motor Hydraulic Motor]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Shaft_Coupling Shaft Coupling]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Mount_Disc Mount Disc]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Blade Blade]
=Blade Guard System=
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Blade_Guard_Support Blade Guard Support]
[http://opensourceecology.org/wiki/Cold_Saw/V1_Design_Files/Blade_Guard Blade Guard]


=Assemblies=
=Assemblies=

Latest revision as of 18:53, 20 June 2012

Uniform Mounting Dimensions

  • Base Plate to Base Flat: 80mm x 520mm
  • Base Flat to Vise: 50mm x 90mm
  • Vise Rod to Rod: 95mm
  • Support Flat to Interface Flat: 75mm x 80mm
  • Hydraulic Motor to Interface Flat: 40mm x 100mm
  • Blade Guard to Interface Flat: 80mm x 100mm

Uniform Fasteners

Short Bolt

Long Screw

Long2 Screw

Short Setscrew

Long Setscrew

Threaded Rod

Short Threaded Rod

Small Nut

Large Nut

Uniform Spacers

Short Spacer

Long Spacer

Uniform Shafts

Vise Handle

Operation Handle

Pin

Coupling Pin

Support Shaft

Drive Shaft

Uniform Shaft Accessories

Thrust Washer

Large Thrust Washer

Large Shaft Collar

Medium Shaft Collar

Small Shaft Collar

Assemblies

Base Assembly

Vise Assembly

Swivel Assembly

Support Assembly

Drive Assembly

Blade Guard Assembly

Full Assembly

Retrieved from "https://wiki.opensourceecology.org/index.php?title=Cold_Saw/V1_Design_Files&oldid=66418"